Ecumaster forum

Hi,
ok the self summing function works indeed and I come to reasonable numbers for two seconds or so. Then the variables flow over as expected. Do you plan to introduce a proprietary feature? maybe for the ADU? Would really be cool.
Thomas

Thanks. I'll try something and will post it here...
Greetings! Thomas

OK, this is getting close. But I will need a refresh rate or some sort of timing indication, right?
What would be the re-calculation frequency of the number?

just wanted to check if my question is understandable... injection pulse width, size of injectors and fuel pressure can tell you relatively precisely how much you consume. Integration over time or some sort of Accumulation function can easily create a total consumption number. PW=0,010s //10ms n=100...

Hi
Is there a way to look into this math function for future? I would like to integrate pulsewidth over time in order to get a value for total fuel consumption (since reset). It works extremely precise when I do it retrospectively for my logs. Would be nice to have such live feature.
greetings, Thomas

Here is the example of my starter. It features Start/Stop button like in OEM installations. After turning on power you can press start. This will turn the starter until motor runs (via CAN rpm threshold). Pressed again and ignition goes off.

Will check this tomorrow. Thank you, found how to deactivate messages. But isn't 0x615=1557 instead of 1541?
You get feedback tomorrow evening.

That was a great help. Will check this Datalogging and also check for potential conflicts. 0x615 is probably in my Ecu broadcasting range. I have got: Your EGT2Can MS3Pro Keyboard 6x2 3col Race Technology Live Your CAN module (steering wheel) Another CAN module for diff temp and other analogs (0x200...

It is the 3 color model

Hi, is possible to run the Keyboard (6x2) on CAN1 instead of 2? My CAN2 is somewhat creating conflicts and sometimes I have to press a button several times before it takes an action. Will the configuration be disturbed by the keyboard? Do I have to reduce CAN1 speed to 500kb/s

No, it doesn't. It is an MS3Pro but I might switch to the black one after last race of the season. Would this support OBD2?

Ah, that is what it does... Ok. Too bad.

Hi, I saw on the beta of the ADU that you implement a feature for OBD2 output. I would like to know if it is possible to have something like this on the PMU as well? I would like to use it with a camera system and OBD2 is commonly used standard. Can you tell me if this can be implemented? thanks for...

Had very good experience. They are very reactive and will always try to find a solution for you. The cases where they don't answer have most of the time to do with the kind of question that was asked. Sometimes the question tells you already that the user shall probably better not touch his engine. ...

For example: Vi-Pec PMU StartBit=0 -> ByteOffset=0 StartBit=8 -> ByteOffset=1 StartBit=16 -> ByteOffset=2 StartBit=24 -> ByteOffset=3 StartBit=32 -> ByteOffset=4 StartBit=40 -> ByteOffset=5 StartBit=48 -> ByteOffset=6 StartBit=56 -> ByteOffset=7 Small mistake here... I think it is StartBit= 7 -> By...

Here is an example of the starter, that I programmed. It is pretty cool and advanced. Basically it is a one butten push automatism. Have a look at it. Normal operation: Power Button -> Starter Button turns orange and is "ready" Push starter Button -> coils turn on and starter output on Starter Butto...

1st answer: connect both.
2nd answer: you can. You will not have your haldex controller and dash monitored individually and cannot observe if you have undercurrent or overcurrent. It is like connecting two devices to one fuse. But yes, it works.

Hi,
Could you please at some point add one column for comments or notes into the project tree? I would like to add some information next to some formulas so that I remember what they do at a later stage...

not very high priority....

Thank you very much. Got it working. Great stuff! Your next version should have more outputs... 8 or so.
Keep up the good work and a happy new year.

Hi, playing with the switch board. How do I activate the outputs? I cannot find the proper CAN definition and the Manual on the website is for the previous version of the board.
Regards, Thomas