Ecumaster forum

I have upgraded to 1.05

No data loss whilst logging to PC

Tried different size SD cards as well as different brands... no luck!

Could really do with some assistance by now...

viewtopic.php?f=19&t=11494

Please look in that topic concerning the EDL-1 logger

Files can be found in the dropbox folder, linked below. https://www.dropbox.com/sh/us1wdzc13di6ya1/AAAJyyFrTKdUytixbQ8HYht9a?dl=0 as an update: tried re-formatting, bought an other brand SD card with lower storage, and now the RED led keeps blinking. Indicating an error with the SD card... The files...

Well... the green LED was blinking, but upon putting the SD-card in my computer... no luck. no data!!!

I have no clue what's going on?

contact the local distributor/dealer?

any pointers from you guys?

Update: installed firmware version 1.05 and re-formatted the SD card.

Hope this helps.

FYI it's a 16 GB FAT32 formatted SD card

Hi all, I've just had a 1+ hour trip. taking my SD-card to check the data, but is simply doesn't show in the graphs... what's going on!? It did work previously... The file size is 1,939 kB so the data should be there... File-->import log-->ECUMASTER logger Software version 1.88exp1 EDL-1 firmware, o...

Feature request 01: An error-dependent P and I term, in order to reduce overshoot and settling time, without sacrificing speed Feature request 02: In te log one can see the "Acc. Enrichment (%)". I think it would be helpful to be able to see how this would break down in terms of Acc Enrichment (dTPS...

Has this been solved?

the plunger thing doesn't move at key-on... I don't hear any "whirring" noise when trying to change the idle RPM whilst standing next to it I'm considering changing to a PWM based Idle Air Valve, but I assume this should work? Could any of you JZ runners check which wire on the plug of the stepper c...

Wiring (Pinout) with the IDLE stuff high lighted

and setting screen shot attached

Awesome.

I'll give that a go then.

Thanks a lot.

Weren't you the one who shared a JZZ30 pin out?

I've used that

The current setting I've also used was Unipolar, with the center two hooked to 12V but no joy.
So I'll cut them out and see what happens.

Hello all,

I've been having some problems with idling my 1jzgte VVTi.

Does anyone have a pin-out from the 6-wire idle valve plug to the EMU?

Any help would be greatly appreciated.

Cheers,

RLP

PSI-Motor wrote:Get a new timing light its quite important.

I know that's why I've set out to buy one... only to find out the shop I went to (only one open today) doesn't have one in stock!!!

really frustrating

Thinking about getting an PC-based 2 or 4-channel oscilloscope too

I'm curious as to why my settings don't seem to work. Setting screenshots, logs and scope can be found here. https://www.dropbox.com/sh/iay1anbyei5zmn1/AAC1MvrtJ764DVIctntQnIdea?dl=0 I would really appreciate any help. I assume my primary trigger setting is wrong I have checked spark presence (my ti...

I'm curious as to why my settings don't seem to work. Setting screenshots, logs and scope can be found here. https://www.dropbox.com/sh/iay1anbyei5zmn1/AAC1MvrtJ764DVIctntQnIdea?dl=0 I would really appreciate any help. I assume my primary trigger setting is wrong I have checked spark presence (my ti...

https://www.dropbox.com/s/zsbwq1zndyaxlgp/JZX100%20ECU%20PinOut%20PDF.pdf?dl=0 I Don't mean to revive a dead topic, but this one seems to be the most relevant to me. Attached is a pin-out of a 1JZGTE VVTi JZX100 (see link) I'm currently struggling with hooking it up as the JZZ30 pinout... well... a...

How did you wire up the VVTi module?

Would you mind sharing the wiring? Or did you base it off the JZZ30 wire up shared on this forum elsewhere.

Looking nice man.

https://www.dropbox.com/s/u2v6bkjezhhy3 ... .xlsx?dl=0

Could someone check if this pinout/wiring setup for the JZX100 1JZGTE VVTi is correct?

Would be greatly appreciated.

https://www.dropbox.com/s/zsbwq1zndyaxlgp/JZX100%20ECU%20PinOut%20PDF.pdf?dl=0 I Don't mean to revive a dead topic, but this one seems to be the most relevant to me. Attached is a pin-out of a 1JZGTE VVTi JZX100 (see link) I'm currently struggling with hooking it up as the JZZ30 pinout... well... a...