Ecumaster forum

Hello guys, I would like to ask you, how your Autotune works. I set up everything correctly, but if I run Autotune, it always corrects my VE way too lean. Why does Autotune do that ? Do I need to set up any other parameters then VE, Lambda and how much Autotune will correct and under which condition...

I dort want to controll the pump. The pump always stays at the same Dc. We need to controll the inside stepper. It is bipolar, so stepper 1a,b and 2a,b are needed. Bitte I dont Know, how I can tell The ecu to controll these 4 Outputs. I dont think, that The Adminis will help us, because then they wo...

Hey everyone! A friend just got his haldex drag racing controller- including a modified Unit. He asked me, how the thing gets connected... So, VSS Input comes direct from the gearbox sensor? What about Analog In#1? The wiring diagram isn't very helpful for me. Is it possible to controll the unit wit...

It's a 4 window Dizzy.

I will remove 3 of 4 Flaps.

There are two types of ABF Dizzys...How ever it's a 4 window trigger.

Thanks alot

Vielen Dank

Kannst du mir mal privat schreiben?

Thanks for the qiuck answer, any other ideas?

Hey guys, it's me again :D I want to run a Vw ABF 16V in full seqential mode non turbo, 9000 UPM. Crank trigger is 60-2. But what to do, to get a good signal of the cam position? I've got a 4-window distributor, is it possible to get it running as secondary trigger? How? Any other ideas to get a sig...

That sounds great to me!
So I do not have to feed the Stepper with PWM? You just connected it directly to the solenoid or what?
Do you have any refs. how the table could look like?
Thank you

Hey there from Germany, I am looking for some examples to control my Haldex system. If you check the EMU Software, you can see, that there is one option to control PWM#1. What I know, is that the Haldex System works with an internal Bipolar stepper motor. I thought, that there could be a chance to c...

Hey, thanks for the quick response.

I tried that...but it didn't work.

I don't know what to do.

Greetings

Hey,

if i download the new Version 1.155 , the program wont start. I had no problems with older versions.
Is there the possibility, that i can download an older Software Version?

Thanks !

Thank's ! That's a good point for getting FF started.

Greetings

Could anyone please tell me the Partnumber of these Coils? I found something, but I don't know, if it's right.
12573190 That's the GM Partnumber.

Greetz

Das kann die Emu definitiv.
Setz dich am Besten mal mit Boba in Verbindung- der hat eine Klappe am laufen. Denke er kann dir da gut weiterhelfen.

Gruß

Um was für eine Klappe handelt es sich denn?
Gruß

Yes they are! And they are much cheaper than the Audi's.

They cost around 35 Euro.

Because many people say, that there are no good coils for full sequence.

I want to go for a boost of 45 PSI- and around 8500rpm.

Okay, that's what i wanted to hear .

So Injector Phase would be 1342
And Ign. also, but 1+4 and 2+3 cables paired.

Am I right?

Hi Guys, I'm planning the wiring for my 16V Turbo Engine. Is it possible to fire with Wasted Spark, but inject in full sequence? What else could I do? I would like to trim each Injector- if the Exhaust Temp's would have big differences. I have a Cam and a Crank-Sensor. Maybe answers in German? :D Th...

Works great! Thanks a lot )))

Hi Jan, sauber! Vielen Dank! So in etwa mit der AFR Tabelle hatte ich es mir auch gedacht- also, dass sie auf die VE zugreift und dann um den Prozentwert trimmen kann- war mir aber aufgrund der nicht ganz so klaren Beschreibung unsicher. Dann werde ich genau so vorgehen- macht für mich auch am meist...