Ecumaster forum

Thank you sir, hadn't noticed the scaling option. Changed the scale from 1.0 to 0,5 and that did the trick

Hi, I'm using the pole position dash and everything works fine except for fuel pressure (in BAR). The value displayed is much higher then the actual value. When I change the fuel pressure, the displayed value also changes, so the input I selected should be correct. 4 bar is displayed as 8, and when ...

I noticed that both Map offset and Built in MAP offset, only offset the built in MAP sensor.
They do nothing for the external one. I tried changing both offsets with and without checking Use table and they didn't work.
Anyone experiencing this? Looks like a bug in the software.

The fuel pressure sensor calibration table only has a X-axis wizard, the Y Axis is limited to 8.0bar.
If you wan't to use a common 10bar sensor, this makes it more of challenge to setup. Is it possible to change this in a future update?

Also how about monitoring oil temperature etc? Are these necessary parameters that a dedicated Haldex controller uses?

Take a throttle body of a G60 with automatic transmission

The above sounds very promising! How did it all work out?

Any chance the necessary modifications for the controller will be shared?

Hi Clem, You`re absolutely right that one doesn't suit all and that every engine needs it`s own tailored tune. My intention was only to create a thread which contains basic knowledge about setting up a safe starting point as this isn't part of the manual. I copied your text to the first post as ther...

Hi Nick, thanks for your input, it was indeed rich, specially in the lower rpm`s. I did this as I used it as a base for startup and first drive and wanted to be on the safe side. Now I know it`s ok, I leaned it out and will try from here. Here`s the link to the slightly leaner map if anyone is inter...

Updated the screenshot and download link.
For now the above table is working ok for me. The results from auto-tune gives me a very decent VE base-map.

Very curious about suggestions / tips and tables that others are running though

Hi everyone, As the first step in advanced fueling strategy and the new autotune option is setting up a Lambda/AFR target table, I thought it would be a good idea to share our tables together with info about the engine/mods so we can learn from each other and setup a base table which gives you a rel...

It runs! At first I set the number of teeth trigger setting to 8 as the manual says number of teeth including missing. But as I`m using only the 4 window hall sender in my distributor, this resulted in only one plug firing. After I set the number of teeth to two, she fired right up. The suggested se...

Thanks guys, I`m gonna try that as soon as I got her running, which should be next Saturday

Hi all,

I`m in the middle of installing a EMU ECU on my VW Corrado G60, which was running on a Link G1 ECU.
On the Link you could set static timing (on the G60 engine this is 6 degrees) and this made the ignition table showing the actual advance.
Is there such a option with the EMU?

Greets Remy