hi! Can I ask you what ignition settings u've used? I connected the CKP sensor wire to Ignition in with pull and ignition out to the CKP input in the ecu. Doesnt work!
Works fine with the stock wiring back again.
Search found 5 matches
- Wed Dec 07, 2016 12:16 am
- Forum: USER PROJECTS
- Topic: Honda EP3 Civic Turbo
- Replies: 5
- Views: 4933
- Wed Dec 07, 2016 12:00 am
- Forum: DIGITAL ECU TUNER 3
- Topic: Cranks but wont start
- Replies: 3
- Views: 2138
Re: Cranks but wont start
check if your CKP sensor has 3 wires or 2
- Mon Feb 09, 2015 10:09 pm
- Forum: DIGITAL ECU TUNER 3
- Topic: Need help wiring the CKP sensors of Honda Prelude
- Replies: 2
- Views: 2045
Re: Need help wiring the CKP sensors of Honda Prelude
I have solved the problem. For OBD1 Honda Prelude: Wire from wiring harness that goes to B15 pin of ecu will should be earthed. Wire from wiring harness that goes to B16 pin of ecu will be used as IGNITION IN for DET3 Connect a wire from DET pin 4 to ecu pin B15 Connect a wire from DET pin 5 to ecu ...
- Sat Jan 24, 2015 7:11 am
- Forum: DIGITAL ECU TUNER 3
- Topic: Need help wiring the CKP sensors of Honda Prelude
- Replies: 2
- Views: 2045
Re: Need help wiring the CKP sensors of Honda Prelude
Here's the information that I have obtained: There are two pin outs for the CKP sensor in the ecu. Pins B15 CKP-P (sensor input) and B16 CKP-M (sensor signal) When I connect the B16 into Ignition in (DET3 Pin 9) and I connect Bipolar Ignition out (DET3 Pin 5) to B16, car starts but it misfires and t...
- Sat Jan 10, 2015 2:47 pm
- Forum: DIGITAL ECU TUNER 3
- Topic: Need help wiring the CKP sensors of Honda Prelude
- Replies: 2
- Views: 2045
Need help wiring the CKP sensors of Honda Prelude
Hi! I own a Honda Prelude 93 running an OBD1 ecu. I've turbo charged it using 510 cc injectors and Im running DET3 Fuel implant. I need help wiring the CKP sensor inputs so that I can advance and retard timing. I'l be running the injectors independently using Fuel implant. Thanks in advance.