Ecumaster forum

E46 guys. Did you install the EMU to the original DME location, which is located in the engine bay next to the brake booster and ABS unit? All the wirings from the chassis is already there, so it seems to be convient loaction. Just thinking is it too hot place for EMU for optimal performance? Other...

Jadzwin wrote:solved via teamviewer

Absolutely solved. Very Grateful.
Excellent work. Many thanks.

Teriksson wrote: Re: BMW 330 turbo EMU black I will build a new wire harness to the engine, so no pnp needed here :) Yes i think the original is a ms43, and i have not cut off the connectors (yet) from any wire, only removed som connectors to sensors etc to build the new harness. But the connector ...

Re: BMW 330 turbo EMU black magelius wrote: Do you know how to control the e46 electric fan? So far I have heard/read that the frequency is 100Hz and it works with PWM positive signal. But I haven't tested this yet.. If you know better, please share. Are you using e46 original injector and ignition ...

RHD wrote: one more little tip dont use AUX 1or 2 for the idle motor since thay dont have the flyback protection (no flyback enables 1&2 to be used for injector drivers during an 8cyl sequential install) Can`t use anything except Hbridge 1a and 1b. EcuMaster Sweden DBW Throttle body must use H-brid...

I might.. if your original ECU(DME) is a DME MS43 I might know. The wires themselves are also often numbered at each end when colours are common - so, colour is occasionally insufficient information. if you have cut the original end connectors off the harness and have lost the printed numbers you ma...

Hello all, I am having difficulty getting the camshafts to advance using ECUMaster Black. The camshafts use a single direction solenoid each with ECU switched ground-path control and a +12 key-on power from the original harness. The solenoids are wired correctly. Testing outputs (500ms on / 500 ms o...

I'm working on one in Canada. DBW works. but you must use G2 and G10 as the throttle motor drivers. http://i200.photobucket.com/albums/aa221/1968_falcon/ECUMASTER/DBW%20explained_zpsz3zlmo8d.png TPS is also wired as the pedal + position sensor. this is also necessary. select your other three inputs ...