Ecumaster forum

Hi, A question regarding the Canbus System of BMW E39 and E46: Since the EMU client supports the instrument cluster/dashboard via Canbus for the E46, is there any chance this would work with the E39 dash too? I noticed that there were various changes concerning the Bus system along the building peri...

But i do need an EMU to use it on a diesel for example?

Anyone?

Hi, was just browsing the efishop website and found this, for me new, thing: http://efishop.pl/index.php?p89,box-2-kanalowy-common-rail Whats the story about it, is it for use on diesel and/or direct injected gasoline engines? What exactly does it do? An explanation would be greatly appreciated! Tha...

Hi, I retrofitted a camsensor on my M30....the difference is not much, a little smoother and you can run a little leaner during partial load conditions. I made a super easy and cheap solution, all you need is one of the M20/M30 VR crank sensors and a few pieces of thicker aluminium sheet metal! If y...

Exactly, this would be awesome!

Thanks

Another inquiry from me: Would it be very compicated to implement in the software, to disable the rpm based fuel cut during the time were afterstart enrichment and/or afterstart idle dc increase is active ? Would make startup on E85 easier under all circumstances.

Thanks

Hi everyone, have some issues here with the new 1.113 firmware update....if I try to open any windows in the client, regardless if a table or anything else, the client won't respond anymore. It's running on a Windows Vista Notebook, never had problems with the client before. Happy easter to everyon...

Hi everyone, have some issues here with the new 1.113 firmware update....if I try to open any windows in the client, regardless if a table or anything else, the client won't respond anymore. It's running on a Windows Vista Notebook, never had problems with the client before. Happy easter to everyone...

Hi at all, I've got some trouble setting up my flex fuel sensor: I've upgraded the firmware to official 1.100 version, but there is still no fuel temperature reading, the log does only show the failsafe value. The ethanol content seems to be measured correctly. I've connected the sensor signal line ...