Ecumaster forum

Jadzwin wrote:EMU sensor ground i a common ground for ADC converters and triggier input circuit so that guarantee stable readings from the sensors.

So use sensor ground as a ground for your sensors, ECU ground as ECU ground

Hi Jadzwin

okay thank you very much for your answer

To clarify POWER GROUND is used to swtich injectors/ coils and so on. ECU ground is for powering low current circuits inside EMU Sensor ground is a ground that should be used by all sensors connected to EMU Hi Jadzwin :) Thanks for your mail, I have tried to measure on the ecu between pin 17 ECU gr...

jaan175 wrote:ECU grounds is for heavy duty like opening injector and ignite sparks if you put some sensor ground there you get false readings. Sensor ground is for sensor ground wires only. Look emu manual there is pictures and other useful information.

OKAY THANKS

Hi

are there some who know exactly what the difference between the ECU graund and SENCOR graund
'm not sure if I do something wrong in my connection to graund

all the best karsen k

Sorry

here is the log whit cam signal an Crank

sleep well

karsten k

Hi I have Trigger Problems whit my Lotus Elise whit Rover K1800 engine !! is it possible that you can help me i dont think this trigger setup is in the software it look like 14-3-13-2 an one cam ( VR )signal ?? i hope it is possible to do something :) all the best karsten Kjeldsen kk-autoteknik my m...

Hi I have a Nissan Skyline RB 25 which has a new Emu ECU and the coil on plug (VW TSFI coil) and I have used normal Nissan setup, but unfortunately I have problems with my ignition,, I made four other Nissan RB20 and CA18 and they have been running fine,, is there a special setup to RB25 ?? If anyon...

we now have a perfect running file
a Peugeot 306 GTI original 167hp, this file is for kent fast road cam and throttle body 42mm,, vw single coil on plug TSI type ..

200hk
205nm
hope others can use it

all the best karsten

Hello I have installed a new ECU master of my Peugeot 306 GTI 167hp std. injectors is there anyone who has a start up map or nuts setup we use the standard SENCOR 60-2 and cam SENCOR we use VW coil on plug so we need a setup with cam sensor setup hope someone has some all the best karsten k Denmark :)

We have fix the problem.
I have forget to connect the power ground cables,
sorry for the inconvenience

KK Autoteknik

We have trying doing that, but there is no change

Hei 
We have some problems with a Nissan CA18DET engine. the coils will not spark.
The coils need ground from the ECU, but gets + (see pic).
We use the Nissan trigger, and all wire is okay
hope some one can help.


KK Autoteknik

Hei
We having this projekt with a CA18DET Nissan engine, we would like to control with the EMU unit.
Then we think maybe someone have a startup .emu file, so we dont have to start from scratch.
We hope someone can help us

Greetings
KK-Autoteknik
info@kk-autoteknik.dk