Ecumaster forum

camsync will need to be "2 symmetrical teeth" even though there is only one pin it is on the crank not the cam so it will still pass the sensor twice every full 720 degree cycle. you will only be able to use wast spark and semi sequential (squirt twice per cycle) Also I think you will find both sen...

yes your crank sensor needs to be working and the ecu getting a signal then it will indicate "SYNCRONIZING" or "SYNCRONIZED" when its cranking or running and you will see the cranking rpm on the logging trace if you have HALL sensor then you will need to "enable pullup" in the settings Thank you a ...

Hi all, i wonder how EMU determines cranking stage. Set up all wires, but when the starter works i don't see any EMU stages in status bar except INACTIVE. Looks like stages should change due to RPM change... if yes i think i need to check my triggers (primary and secondary) Tried to use SCOPE tool t...