Ecumaster forum

you mean the ford transit coil?

you can use for the aan the original throttle body and tps with the external idle valve.

or you go for the passat, a6, a8 electronic gas pedal and a full electronic throttle body.

yes.

but why don't you use four coils for the ignition then and go for full sequential, too?

ok. thank you!

Ok. So now i have to add an additional trigger wheel to the 7a anyways. Should i use the normal turbo trigger with one gap for the cams or are there better and more acurate triggerwheels i could/should use with the stock crank sensors? What about the r32 4-pin or the mx5 3pin wheels? Do they improve...

sometime some sleep tells you how dumb you are.

just forget about my previous questions. crank to cam ratio is 2:1.
with crank only its not possible to set ignition and fuel to fully sequentially.
and thats what you have to do with a 5-cylinder...

yes. mostly.

thank you, but could you please explain it a little bit more? the tdc-pin is 60° before tdc on the flywheel and then there are 135 teeth. so wouldn't it be (135*2)/5=54 teeth for every single cylinder to calculate the ignition timing? im asking because i want to get rid of the distributor and don't ...

hi there,

do i really have to use the cam#2 sensor? or does it run without?
can't it calculate everything due the two crank sensors?

hi HVR Team:

where did you get that dwell time from which is written in the pdf?

ok thank you.

i have to do this somewhere in the future.
but i'll let you know!

you should set coils type to "coils with built in amplifier" for testing.

otherwise you might destroy them.

thank you!

i have to check that somehow...

@ mlnta3:
that would be realy helpful!

Hi there, I'm Jan from Germany (near Cologne) and want to use the EcuMaster EMU for a Audi Coupé 20V with the old 7A engine. first of all i want to solve the heavy idle problem i got with the stock ecu. Project status: planning I wanted use flexfuel for E85 and drive-by-wire. in addition to that the...

hi there,

can i wire an ITT Mark20 Plus ABS (+ is the one with canbus) directly to the ecu?
i wanted to do so because then i could use the ABS as VSS.

cheers,
Jan

do what you have to do...

Hi,

is there any success on the implementation of autotune?

greetings from germany