Ecumaster forum

also when cranking, under the ignition log, it comes up as all the triggers as being synchronized, but it is still just cranking and to even offering to fire. I've double checked my wiring and all is ok so I'm putting my problem down to something in the settings somewhere is not correct, i assumed i...

Hi, I've tried changing the settings you suggested and changing the wires round at the crank sensor as suggested but still getting the same scope pattern, The primary trigger settings that are in the Base map I'm using say that the number of teeth including missing is 2, is this correct? I am gettin...

Hiya,

Fixed the issue which turned out to be a 12V supply problem, ive recorded scope data which i'll post below

thanks for any help

Stefan

here's a copy of the base map file I've been using

I'm using the old subaru 6/7 trigger pattern, I'll post the file I'm using tomorrow, when I crank the engine over it also says that the ecu is disconnected then reconnects once I stop cranking. When I installed it I followed an ecumaster pin out document that I had sent to me when I purchased the em...

Hi, I've just wired in an Emu into my 1996 subaru legacy gtb that is running an ej20h but has been converted to a single turbo so is basically an ej20g, with 440cc injectors and a vf34 turbo and 3" exhaust system, Anyway I've wired it in correctly making sure every pin is where it needs to be and wh...