Ecumaster forum

thanks for the reply, can you confirm the correct way to connect a 2 wire level sender into the pmu? would it be the same if using it via the pmu or via the emu black or would it need wired differently? I was going to wire 1 pin from the sender to sensor ground, the other pin to an analouge input, t...

hey, can anyone explain how to set up a fuel level sender on the pmu?

I'm guessing it involves using the table function but I'm not 100% sure

any help appreciated thanks

wow, that was easy

thank you very much for your help

I think I know what to do from here

can someone explain how to setup the switch board in the pmu software project tree? from what I can gather I need to make a canbus message object, then a canbus input then set up a switch via the "s" in the project tree I'm unsure how to setup the message object for the 8 switches? can someone kindl...

hey, thanks for the reply

yeah that's how I thought it worked, just use a normal momentary button then set it up via the pmu software

thanks

hey, just about to build my steering wheel with buttons and the can switch board before I start I just wanted to make sure what I'm doing will work. I plan to run my lights, wipers, horn etc off steering wheel buttons, ive got momentary push buttons but I wanted to make sure this buttons will work I...

anyone?

this is holding me up finishing my loom as I don't want to do it wrong or use to small a wire

hey, can anyone give me some advice i cant find a manual for the emu black so have been lookinf at the emu manual i see the emu black needs a battery +12v and switched +12v my question is does the battery +12v need to be constantly live or can i run that off my pmu? i was thinking of running the bat...

hi, I'm planning to ditch my ignition key/barrel and wondering if there is any way to use the can keyboard as the ignition? looking to use one button to power up the pmu then a second button for the starter motor? is this possible? as i see the pmu needs a switched live to turn on so was wondering i...

hey, got a couple questions about installing the pmu first question is I see you can combine 2 outputs for a bigger amp output, setting it up in the software is straight forward but what I cant find is how you wire that up to your output? for example I want to wire up a fan, do I only need to connec...