Ecumaster forum

A few more things I learned that was not immediately obvious for variable cams. 6) The cam offset in the CAM#1 and CAM#2 menus can be used to correct your cam angles after you get them to trigger correctly. 7) This one is probably obvious, but I then used the "min tooth" and "max tooth" in CAM#2 set...

Things I have learned or checked. The EJ255/EJ257 motor in this car with intake AVCS has the following: 1) VR sensor for the crank. 2) Two Hall style cam sensors. 3) 36-2-2-2 Which is a 36 tooth with 2 missing teeth from three different places on the crank gear. 4) Has a 4-1 style AVCS cam sensor so...

Thank you. Working on a similar cam angle issue myself and this post gives me a few more things to try so wanted to thank you for posting your findings.

I am working with an EJ255 motor with intake AVCS only. I finally got some good crank triggering and what I think is good cam signals too. But my log is showing tooth out of range. When the cams advance 20 degrees, my cam angle in the log shows -400s depending on the settings I use in the trigger se...