Ecumaster forum

hey im running a GT86 2jzgte VVTI as well!

Any chance we can get a notes section for version updates? also how about increasing frequency shift light as it gets closer to desired full on RPM?

Thank you

i was thinking we could add a function to the shift light. a simple line of code to allow users to set up a flashing or strobe setting that increases in frequency when getting closer to a set redline until it is finally a solid light.

Karen, Please take another look at the log, although it may just seem like a mega rich area due to the map, I assure you thats not the issue. Take a look at the steady state low load cruising at 31:30 to 32:10. While low load and cruising it is fine, until this moment happens. And then again at idle...

Hey guys! I have a bit of a problem, Ive finally gotten most of the bugs out of my car and the tune is nearly spot on for the VE table so far, but i am running into an issue that is very intermittent. This problem only occurs every once in awhile, I can probably drive for 10 hours and this problem w...

I have a completely new engine harness. made from scratch with shielded wire for the camsync until about 4 inches from the connector. Im may have to make a little four inch extension or something idk

so just incase anyone is having a simular problem i will go over a bit of the things that were wrong with my tune. First i realized the idle air control was set to sparc cut above 1000 RPM which was no good. second i went through my logs for ignition and realized that i had my camsync trigger tooth ...

I also fixed my issue, i went into secondary trigger and disabled camsync above 1000 RPM. however i dont like the idea of losing my ability to use VVTi, if i just do what you did with the advanced filter would i be able to retain my VVTi?

im also cant upload a log for some reason.

This is the log, if it allows me to upload. It keeps saying "Sorry, the board attachment quota has been reached."

Hello, I am just getting the car running and im having a few problems ill list separately below with a couple attachments of logs. This is a 2jzgte with a single turbo aftermarket intake currently on e85 with 1600cc injectors (bosch). I have a feeling there maybe something wrong with the cam or cran...

Hello, Currently i am working on the final stages of my engine and would like to get the can bus set up. Im not so sure im worried about wiring it up as much as i am about how to program it to output a can bus signal of my choice. I go into the EXT. Port > EMU CAN Data screen and I see 5 different l...

Just talked to a few people and I think I may have a solution. I can't say as of just yet BC this hasn't been released to the public, but I will update this thread accordingly once u get the go ahead.

So I watched that video, and it seems extremely pretty difficult unless I have the software and stuff. and possibly a working engine to test stuff. which I don't at the moment. If anyone has any personal experience please let me know.

I have a car that gets a rpm signal from a can signal. Is there anyway the the emu can output a can signal so that my gauge will work?

So ive talked to tweak'd performance, they make a harness that utilizes the stock ECU and the EMU (or similar standalone) but they don't mention how to do it exactly. They don't want to give away their secrets for free, I did talk to them a bit and they said its as simple as running a few sensors fr...

Awesome, could you provide a bit more info on how you went about doing the dual ECU? what wirers did you run into the stock ecu?

Thanks,
Kyle

Hmmmm I didn't think of using the can bus. has anyone done something similar?

any more suggestions?

So I got a really good deal on a 2014 FRS, and I know that the 2JZ will fit as some of the drivers of formula D have done so. my question to you gurus is: What wires do I need to send into the stock harness to run a dual ECU setup? stock ECU to retain gauge cluster ABS and anything else that's contr...

I had ordered it before you said it might be the wrong switch, Ill take a look and report back on it so that people may know if they can use it in the future or not.

-kyle