Ecumaster forum

Ja ist fertig. Separates TriggerWheel auf KW gebastelt. Hab mehrmals bei ecumaster Suport Angefragt mit der Problematik. Daraufhin wurde ich geblockt. Es kam rückmeldung das ich als spam behandelt werde und meine mail nicht zugestellt werden kann. Problem ist das bei Drehzahlen grösser 7000min das D...

Anyone runing a EMU Black on this car with stock trigger sensors?

i think no one

Hello is it possible to run a BMW S65 Engine from a BMW E92 M3 4.0L V8 with a EMU Black? as i know has the Engine: 1*cranksensor (60-2) 4*camsensor (???) 8*12Ohm injectors( Inj6 +2aux) 8*active coils (could paired to waste spark ign1to4) 2*throttle DBW motors (H-bridges a+b) 4*Vanos(???) 1*idlevalve...

Hello
Has anyone a Racetechnology Dash2 (not the pro) working with the EmuBlack?

http://www.race-technology.com/wiki/ind ... erEMUBlack
in this manual it is over CAN...

maybe the dash2 will work with data from EmuBlack rs232 rxd txd ?

.

are there any suggestions (which hardware to use) for stand alone race Dashboard where i can use Realdash Software.
Mobile phones are not practical, long boot time, power on off by ignitionswitch

Anyone did a EMU Black instead of the Sagem S3000. How to bring the electricbox (immobiliser) to switch ignition to the ECU. Haha, its very complicated French Car....... you have two ways how to do it. Leave everything on place, just control the injector, coils, and cam..... dont remove anything on...

Anyone did a EMU Black instead of the Sagem S3000.
How to bring the electricbox (immobiliser) to switch ignition to the ECU.

I told that this a Porsche ...sorry that i Forget to told you that Porsche 964 and 993 are Twinspark and they use Twindistributor. Old Porsche with Twinspark,Twindistributor has two circuitbreaker and they set the ignition timing different. For example they ignite one spark at20° and the other 22°fo...

Yes it is a solution but i think in this case i dont have double ignition.(twinspark)
I want on one zylinder for example one spark at20° and the other spark at22° in the same event.

Hello Karel thanks for your answer.

I give it a try. Did you test your setup you have posted?

Twin Distributor Postby shrek69 » Mon Jun 19, 2017 7:13 am Is it possible with Elite ECU that on a twin distributor engine the second ignition circuit have an different ignition timing? or an offset for example 2°. Engine is a Porsche 964RS flat six with 60-2 Trigger . User avatarHaltechMatthew Halt...

Hello
Car is a Porsche 964RS with two Distributors.
Is it possible that one ignition circuit have different ignition Timing(2°less for example) than the other circuit?
any suggestions?

How about a runtime counter? Engine runtime.

Errocodes with freezframe

.

Try to increase "EGO Integral Limit"

You have also "Idle Control max rpm" to define needed window and "Idle rpm ref" to define DC% when off idle. Also you can limit valve with "Idle valve min DC". These parameters imo should be enough to get rid of "dip" that you describe. Idle control max rpm has to be set high enough so that the fue...

gregpe wrote:There are some delays temporary to be honest...

Thank you for the answer

two weeks waiting

What is the current delivery time for emublack.

please