Ecumaster forum

Well I am not from US. The ECU was bought from Ecumaster directly and yes I use Win7 but why could I connect to another ECU previously? But a friends PC with win 8 is fine. I don't like win 8 at all so if possible I would skip this option. maybe try this USB driver : http://www.ftdichip.com/Drivers...

hi again, I'm using advanced lambda fueling and working with lambda values, but, how can I tell to the ECU that for the gasoline I'm using Lambda=1 is 11.9 AFR? If the ECU uses the usual 14,7 AFR for calculations, injection times are going to be wrong and I will have the mixture leaner than it shou...

look at this topic : viewtopic.php?f=19&t=581

FERNANDEZ wrote:I hope it's not the case, because it's the only reason I bought this.

this can be helpful: http://www.megamanual.com/begintuning.htm

Hi, I have question to Ecumaster team. Did you maybe tried experiment with some kind cable free USB data transition. I tried to look for something simple but without much luck :( For simple data transition https://www.pjrc.com/teensy/td_libs_VirtualWire.html parts are ridiculously cheap but this is ...

I think stepper output is not the best output for fuel really, maybe this is describing your situation : viewtopic.php?f=19&t=439&p=3014&hilit=stepper#p3014

You must change output of external port in EMU software (lots of info can be found in help on each function window in EMU):

Tgood wrote:When using the aim MXL strada which ecu are you supposed to use in the aim settings? Ecu master is not on its list

thanks guys :) I have another question, when I install DET3 can I remove the cat? (2 lambda sensors) better way to leave second lambda and add "tube" that will "emulate" after catalizator conditions : https://www.google.pl/search?q=lambda+mini+cat http://www.bigdaddiesgarage.com/images/mini-cat-cut...

if i remember good i needed to cut off crank sensor signal and connect one cable to sensor mass and other to ing input: http://www.ecumaster.com/pobierz/det3/DET3_WiringDiagrams.pdf also if you have this small ECU with two connectors you should go in FIT mode otherwise it will be never ending fight ...

DET3 don't have built in O2 sensor controller, so you must take if you have 0-5V signal from external controller and then load proper scale for Analog in you connected it to i am now trying to set up the software and am having troubles, the manual is not really user friendly in how to set things up.

I think it's not possible to have one P&P adapter for all those cars. Yes true but key factor is availability of connector, i saw them on AliExp but i don't need 1500 pieces. I have those plugs if anyone wants to make their own connector and i can make connectors for all models of e36 BMW This is g...

Hello, do you have EMU Plug&Play adapter for Bosch Motronic M1.7 88 pin connector? : 88pin.jpg http://g03.a.alicdn.com/kf/HTB19UVzIXXXXXcTXFXXq6xXFXXXP/ECU-car-engine-computer-board-88-pin-connector.jpg Applications include all E36 BMWs, 1996-1999 Porsche 911, 1997-1999 Porsche Boxster, and 1997-200...

How does it get connected? All I see is a usb slot on the ecu?

check this topic : viewtopic.php?f=19&t=82&p=402&hilit=port#p402

Hi, I'm currently looking for radio with android and possibility to connect it to EMU... i don't have 2din space so I'm looking for something that will fit 1DIN i found two units that can menage this one is : http://www.ebay.com/sch/Vehicle-Electronics-GPS-/3270/i.html?_from=R40&_nkw=ouku+android+1+...

so if you are on stage where device is mounted and willing to work, i will send project and logs to Ecumaster team for verification personally if i would be in your situation i will just buy this part and send it directly to Ecumaster and wait for update from them never the less all info thats is re...

Just bumping this thread i still need to find the settings for this DBW hrottle body. I have a customer trying to set this up right now and had a lot of interest for them in Aus they are a 4.0L turbo 6cyl ver popular and ideal candidate for EMU ecu Hi, i looked a little bit for it and i assume it w...

You need fine tune your engine noise table, ECU is seeing false knock now and apply corrections...

Hello, Thanx for the help so far, how can i log the coldstart? Regards cold start means that support needs log form morning when you go to the car and try start engine, so just save log and first few minutes can tell what is happening, off course you need upload your config file (actual) to make fu...

are there any pre order options ? https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpl1/v/t1.0-9/s720x720/12196351_1663068200617246_2972244499203799098_n.jpg?oh=9728b9e4f6f97a171f258eae359d1d52&oe=56C0BC9F&__gda__=1458918202_84b4a9a0b7f174b0a2758b1a9095b494 https://www.facebook.com/ECUMasterUSA/pho...

W Outputs masz 4 Parametric outputs, na 1 mozesz skonfigurowac 3 zmienne na pozostalych po 2, take wiec to o czym piszesz jest do zrobienia bez problemu.