Ecumaster forum

Thank you for the fast support

The other problem is already solved.
Now is the first trigger ok.

Which setup for the second trigger is the right one?

The motor starts with rising and falling

I have switch den cable. And now the car dosn´t start and the trigger signal is the same.

The problem I have also just found.
What makes you think this is the VR sensor connected incorrectly?

So here is the trigger scope.

I have check the cam position this is ok.
The hall sensor from cam is at the same position like before i change the cams.

When i start in wasted spark mode the ignition angle goes as i cranking mode but the injection time is 0ms and the injectors make once splash.

This makes no difference.

With a clear emu file on the ecu it is working in cranking Mode.

In wasted spark mode it dosn`t work with my primary trigger Setup.

Is it in full sequentiell mode.

I will check this in wasted spark and check the cam position.

Hello, I have a problem at cranking. When I start my car then comes the ECU State is inactive although rpm detected. Sometimes the ecu State is cranking when I start the car. Why the controller does not recognize it, I did start? Here a log. 6:10 to 6:50 there is good to see. Last year all was ok. T...