Ecumaster forum

NO you don't have to wire them differently. But without cam sensor you can't run sequential injection. Therefore you have to use squirt twice per cycle, without that the injector is firing on the wrong stroke for one cylinder, which is referenced to the same ignition event. Other than that looking ...

But you are going for bank fire? Because of no CAM sensor and your injector phase... Enable "squirt twice per cycle" Are you getting spark and fuel? If so, try adding/removing pulse width in the cranking fuel table. Could be missfiring, because of too little fuel. Hi, I don´t use cam sensor, inject...

pric wrote:Seems alright if you have them wired Coil1 to Output1, Coil2 to Output2, Coil3 to Output3.

How are your injectors wired up?
Bank Fire?

Hi pric, the injectors are wired up individualy, 6 wires to the ecu for the 6 injectors and external 12v suply.

Thanks

I forgot this one

Hi, need some help, i need to see if i ve got the ignition Outputs right, car is Opel with X30XE Engine with Turbo, I will upload the ignition and injection settings to see if I have something wrong. On autodata tell me , the ignition firing order is 123456 and I am using a original wasted spark coi...

Hi

Thank you RHD for your explanation

Hi people , can anyone help me to connect a wasted spark coil from a Ford Edis coil but it will work without amplifier module, I just need to know what ignition output (G8, G16 G9 or B16) I need to connect to a Bank1 and Bank2.

Thanks