Ecumaster forum

Its possible to add a fuel Temperature ?
I think it was a good Feature

Greetz

WHy you have on the dyno 0,3 difference?

post please your emu file

No Problem but when you work with Auto tune and ego Controller it doesnt work good!!
Vetter wirh lsu 4.2 direct to the emu

Yes but which connector is what ?
In the Emu are 4 connectors

Hello
Anyone has a can Bus Wiring Diagramm ??

Greetz

Yes connect the wire from the Transmision im the VSS from the Emu

But you Must select in the Option "calculated"

Thanks!!
Problem is solved ,the sensor was broken

Hi i have problems with my EGT setup. i use two controller , one from emu and one external controller. in Idle ich have around 370degrees (external controller) and emu i have only 170 degrees .. can i change the ref. table from egt? and where is the option? i cant find it or i must work with Pullup ...

Where i can buy these parts?

Greetz

Good idea with the HUD function!

Make first a scope of your trigger

Hello I found the problem why not turn higher . with gear sensor input I have an analog cable lock attached , but it was not active (see picture) .
When I put this out , has all works as it should .

Yes it is 0-5v.
And the output is configurable
Here is a picture from the aem settings ...

When i have these settings on the emu i have not the same value at controller and emu.

Hello i have problem to define the Aeromotive Lambda controller . I can not make the external display with the ECU to sync (align) Settin under Oxygen Sensor: 0 volts = 10AFR 5 volts = 20 AFR to stand But it is not true .. There are other settings that I need to do? edit: can i change from afr to la...

here is mein config file and scope

Sorry but i dont understand..
What do you mean with the warmup enrichment 82 c. And ias correction 22 ?

Hello I have a problem with my vr6 engine. i think i have problems with my trigger signal because when i drive on the railway sometime lost the signal. and a other problem is my engine can not rotate above 6600 rpm. my rpm limiter and fuel cut etc is 7300. maybe anoyone has so idea , why the engine ...

tanks for the answere =)
where i can buy these sensor ?

Hello
I have problem with my oil pressure settings
I connected my oil pressure sensor at 5v ground and
And the other at analog 1.
My problem is now my emu show me nothing about the pressure.
When i try it with air pressure is anytime at 0bar

Anyone a solution?