Ecumaster forum

Plus one on that .. PWM fuel pump control please?

Thanks Jadzwin..No idea what you did but I quick formatted all my cards,dropped the updated bin file on them and they all work perfectly..Initially I got a red/green flashing light but cycling the ignition gave a flashing green.Great support as usual!

Through an expensive process of elimination I believe only class 4 cards will work with the EDL...Can someone confirm this please? Do you have a class 10 card working?

Stole a very old PNY 4gb from a friend's​ camera..Reformated..Put it in the logger and it all works perfectly..i think we can we assume sandisk cards don't work with this logger.hope this helps.

I reformatted a Sandisk 16Gb card using your suggested app. and put it in the logger.Powered it up in accessory position on key so no power to ECU. Still a yellow light..Ie no card installed! Has anyone got a Sandisk card working? I'm off to buy something else at lunchtime.Will post the results.

I have the same problem..orange light when I insert the card (card error)..3 new cards purchased..all 16gb. Bluetooth works but only a few channels transmitted on either Realdash or EMU dash.I can set the time and get a flashing blue /red light but no logging to card.I have tried all the various .bi...

Hi..in your boost target table #1 you have 2.4 bar as your target and i think that's what you are hitting.Might be worth switching on DC error correction too and adjusting the DC table to make the error correction zero?

That's the D1846A then? Can you post the calibration when you find it please.thanks

Is this not a pressure switch? One pin for warning light and other two pins fuel pump enable..if it is a genuine pressure sensor it's cheap as chips!

Hi..This might help.

Hi, After many different file downloads and aborted installs I finally found one that my Toshiba laptop will allow me to install in place of of my existing driver..It became apparent to me that you don't go for the" latest" driver but look for the next updated driver in date order to the one you hav...

Hi.I had the same problem..if I right clicked and ran as administrator and also I have avg antivirus and must run the application in a "sandbox" .the client app then opens but I still have a problem with open gl in my onboard graphics..its looking like I need a new computer.. Stay away from toshibes...

Hi ...I have a Toshiba Satellite C660 with Intel HD graphics on board.I am using EMU Client 1.157EXP 1...I am only able to run the EMU client in a "sandbox" and it does not appear possible to update the Intel HD driver.I cannot run 3d tables or gauges I have tried manual installs of all possible Int...