EMU Software 1.068 available
Posted: Wed Dec 03, 2014 12:42 am
Hi there!
There is new software 1.068 available. There are two important changes:
1) The knock sensor bug with channel #2 readings is fixed. In addition information about ignition event(s) that causes knock is visible in the log.
IMPORTANT: We increase dynamic range of knock sensor input. Due to this fact the readings from Knock sensor are lower about 0.22V
All engine noise tables prepared in previous software versions MUST be lowered by 0.22V (enter 0.22- on selected cells)
2) Now keyboard shortcuts can be customized. Just enter Tools/Customize keys option
The rolling antilag strategy still doesn't work, but we promise to make it working ASAP.
For more details plese refer to change log:
https://dl.dropboxusercontent.com/u/286 ... 68exp1.pdf
Ecumaster Team
There is new software 1.068 available. There are two important changes:
1) The knock sensor bug with channel #2 readings is fixed. In addition information about ignition event(s) that causes knock is visible in the log.
IMPORTANT: We increase dynamic range of knock sensor input. Due to this fact the readings from Knock sensor are lower about 0.22V
All engine noise tables prepared in previous software versions MUST be lowered by 0.22V (enter 0.22- on selected cells)
2) Now keyboard shortcuts can be customized. Just enter Tools/Customize keys option
The rolling antilag strategy still doesn't work, but we promise to make it working ASAP.
For more details plese refer to change log:
https://dl.dropboxusercontent.com/u/286 ... 68exp1.pdf
Ecumaster Team