Ecumaster forum

Hi There!

There is new software version 1.112

Now the EMU file are associated with application so the user can just press on emu, emulog, emuscp file and the client will open.
Division operator added so now you can divide the cells value (eg. 2/ divides all selected cells by 2)
EMU CAN protocol modified and new data frame 0x605 added.

There is also improvement for idle control in ALPHA-N. Now the idle valve DC can influence VE table (DC VE Correction table)

Is anyone experiencing the same error when you open the program? Didn't get this on the previous versions.

Looks like you do not have adiminstrator rights to register file extension in registry.
Try to start application as administrator.

I got it on both my laptops, but not logged in as admin either.

ATS_Scott wrote:I got it on both my laptops, but not logged in as admin either.

if you can, try :
and to support , division function don`t works for me i want simply make 3 steps:
open AFR based map change fuel strategy to advance and divide all by 1.47

Thanks for the tip, that did the trick for me.

Worked for me too, Thanks!

I updated from 1.1 and it do not work , try to uninstall put 1.1 again - no problem but 1.112 do not work on XP , here is the error

I had the same issue and running as administrator fixed it.

This error is while logged as administrator , I check this twice

I 've tested my other laptop , everything is good but when car starts it disconect and conect only when car is bot running

In next version the application will force the system to run as administartor. I think it helps.

Divisin bug will be also fixed

If I got it right, these registry keys are just create once, so why not just creating the registry keys during setup? There you have admin rights anyway and the application does not require permanent admin rights for running.

In next version it will be done in that way..

killerbee wrote:I updated from 1.1 and it do not work , try to uninstall put 1.1 again - no problem but 1.112 do not work on XP , here is the error

xp error.jpg

I have the same problem.

Will wail till next version , meanwhile changing USB cable help me to work with my other laptop ...

Hi guys,

the function enable log and look at values with password protection does not work. When i activate the password protection emu Is locked and i can do nothing else.

Jan32: It works. Just press enter or enter wrong password. Then the new message box appears.

I tested it and it works. Thanks Kuba.

There is problem conecting with dropbox to download fitmware