2 JZ and Dwell Errors

All about our superior engine management unit.
Locked
redmkiv
Posts:24
Joined:Fri Mar 20, 2015 9:11 pm
2 JZ and Dwell Errors

Post by redmkiv » Tue Mar 15, 2016 2:47 pm

working on Supra, and have some Dwell Errors, Engine don t revs over 6500 RPM, all other is working fine, is the first Supra with wiring the EMU without the Adapter
Last edited by redmkiv on Thu Mar 17, 2016 5:30 pm, edited 2 times in total.
Top
redmkiv
Posts:24
Joined:Fri Mar 20, 2015 9:11 pm

Re: 2 JZ and Dwell Errors

Post by redmkiv » Tue Mar 15, 2016 3:44 pm

First settngs for Fuelcut are 7300RPM i changed it to 6500 for testing last driving. Drive with load i never revs more around 4500 to 4800 RPM. No Launchcontroll or Soft revcut aktive.
Top
redmkiv
Posts:24
Joined:Fri Mar 20, 2015 9:11 pm

Re: 2 JZ and Dwell Errors

Post by redmkiv » Tue Mar 15, 2016 6:14 pm

Engine Dead yesterday....Piston 6 to lean.
Last edited by redmkiv on Thu Mar 17, 2016 5:31 pm, edited 1 time in total.
Top
Kenny123
Posts:14
Joined:Sun Jan 03, 2016 10:42 am

Re: 2 JZ and Dwell Errors

Post by Kenny123 » Thu Mar 17, 2016 9:19 am

Have a similar problem !

What have you done ?!? In the signal wire from the camshaft position sensor a resistor ?!?
Or in the signal wire from the crank position sensor ?!?

Thanks for your help !
Top
redmkiv
Posts:24
Joined:Fri Mar 20, 2015 9:11 pm

Re: 2 JZ and Dwell Errors

Post by redmkiv » Thu Mar 17, 2016 5:32 pm

Resistor was the wrong way...don 't do it.
Top
Locked

Return to “EMU STANDALONE”