Wasted spark wiring

All about our superior engine management unit.
Locked
turbogsi
Posts:7
Joined:Sun Jul 10, 2016 4:00 am
Wasted spark wiring

Post by turbogsi » Thu Aug 11, 2016 8:47 pm

Hi,
I need an advice to wire a bosch ignition coil for wastedspark setup,the ignition coil is 3 pin

Thank you
Attachments
P_20160810_173415_1_p.jpg
Top
RHD
Posts:537
Joined:Tue Oct 07, 2014 4:28 pm

Re: Wasted spark wiring

Post by RHD » Fri Aug 12, 2016 1:46 pm

you will need to find a matching wiring diagram to find what pin numbers match but 1 pin will have +12v and the other 2 will connect to ignition OP's on the ecu (example IG#1 & IG#2)
Top
turbogsi
Posts:7
Joined:Sun Jul 10, 2016 4:00 am

Re: Wasted spark wiring

Post by turbogsi » Sat Aug 13, 2016 4:02 am

i have found the ignition coil pins wiring as you see in this photo,so pin 2 is +12v and pin 1 i wire it to G16 and pin 3 to G8?
Attachments
EZKMod2.jpg
Top
RHD
Posts:537
Joined:Tue Oct 07, 2014 4:28 pm

Re: Wasted spark wiring

Post by RHD » Sat Aug 13, 2016 5:19 am

yes
assuming firing order 1342
4cyl WS.jpg
Top
turbogsi
Posts:7
Joined:Sun Jul 10, 2016 4:00 am

Re: Wasted spark wiring

Post by turbogsi » Sat Aug 13, 2016 3:26 pm

Thank you,now i have understand
Top
Locked

Return to “EMU STANDALONE”