Oxygen Sensor LSU 4.2 shows only 1

dontriple · Post by **dontriple** » Mon Aug 08, 2016 4:33 pm

Hi,

i have a problem since 2-3 Months with my second EMU,

AFR/Lambda shows only 1

ive checked 100 times the wiring, changed the Laptop, changed the LSU

Can u help me maybe? it has never been shown something else than 1

my other EMU works perfect

dontriple · Post by **dontriple** » Thu Aug 11, 2016 5:43 pm

Please help

Where are the EcuMaster Gurus

RHD · Post by **RHD** » Sat Aug 13, 2016 5:44 am

you can try swapping your ECU's ... but it can only be a wiring or a sensor problem

dontriple · Post by **dontriple** » Thu Sep 01, 2016 10:14 am

Hi,

we swapped yesterday the ECU and it still shows Lambda 1 / Ive transfered also the ECU Files from my working ECU to the other and no chance

Lambda shows still only 1 ..... Please guys give me a last hope

pric · Post by **pric** » Thu Sep 01, 2016 6:14 pm

Must be something with the wiring.
Maybe no supply on the Sensor?

dontriple · Post by **dontriple** » Thu Sep 01, 2016 7:24 pm

But i swapped the ecu and than it works, i have 2 cars running on emu. And the one is not working since ive bought it

PSI-Motor · Post by **PSI-Motor** » Thu Sep 01, 2016 10:15 pm

dontriple wrote:But i swapped the ecu and than it works, i have 2 cars running on emu. And the one is not working since ive bought it

Send it to your reseller and he will fix it.

dontriple · Post by **dontriple** » Fri Sep 02, 2016 8:08 am

OK, than i will send it to the reseller in some weeks because i need the car

One last hope:

1. Are the Outputs/Inputs for the LSU 4.2 one the ECU fix ? Or can i change them?

2. on my Log all values are moving except of the AFR/Lambda, my this help

dontriple · Post by **dontriple** » Mon Sep 12, 2016 11:01 am

Kisielisodd · Post by **Kisielisodd** » Mon Sep 12, 2016 11:51 am

1) wiring problem

2) power supply issue

3) damage sensor

No readings at all from the sensor.

dontriple · Post by **dontriple** » Mon Sep 12, 2016 12:22 pm

1) Wiring problem it can not be, because it works with my other EMU
2) Sensor problem, the same
3) Power Supy, the same

IT must be something with the EMU / U know mybe how i can check this ?

Kisielisodd · Post by **Kisielisodd** » Mon Sep 12, 2016 1:25 pm

dontriple wrote:Hi,

we swapped yesterday the ECU and it still shows Lambda 1 / Ive transfered also the ECU Files from my working ECU to the other and no chance

So finally is lambda working on other ECU or not ?

dontriple · Post by **dontriple** » Mon Sep 12, 2016 1:31 pm

Yes it works on other EMU /

dontriple · Post by **dontriple** » Mon Sep 12, 2016 1:33 pm

I meant that i swapped the "BAD EMU" to my other car, where everything is working perfect.

And it still dont work

So it must be something "INSIDE" the EMU :/

Kisielisodd · Post by **Kisielisodd** » Mon Sep 12, 2016 4:51 pm

Ok understand, there may be a internal malfunction, the only way to confirm damage unit, is to send it back.

dontriple · Post by **dontriple** » Tue Sep 13, 2016 9:15 am

Ok than i will send it back in 1-2 Months,

but mybe can u give ma tipp how i can read mybe in a other way the Lambda ?

Which of this values will show me the Lambda in Volt ?? Or will my plan not work

Ecumaster forum

Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1

Re: Oxygen Sensor LSU 4.2 shows only 1