Im not getting very high Knock sensor value at all , cant seem to get it be around 2.5v no matter what i do , ok if i put the hkz down to 1.5 it will get to 2.5v at idle but at 6.64 ( 3sgte ) its around 0.4 at idle and drops to around 0.18 when on power , and thats 650hp worth , im sure this should read higher , i dont have any other det monitering to reference against atm ( need to get a knock block ) just thought maybe i have the wrong kock sensors or something . ( tried two bosch type now )
settings are 664 hkz . 200 gain . 100 bottom one
anyone seen this before ?
( just ran a 10.37 @ 138 on the strip , max knock i saw was 0.18v , thats was 2 bar boost on Vpower pump fuel )