Output AFR data to gauge

All about our superior engine management unit.
Locked
outrider
Posts:5
Joined:Thu Feb 09, 2017 2:33 pm
Output AFR data to gauge

Post by outrider » Wed Feb 21, 2018 8:31 pm

Is there a way to configure the EMU to output AFR information as a simple voltage range to drive a gauge? I know I could buy an external wideband and use it as the input for AFR, or use the bluetooth adapter with a universal gauge or tablet or something. I would like to just output a voltage that can drive a standalone gauge.
Top
nolagg
Posts:20
Joined:Sat Jan 16, 2016 5:12 pm
Location:New York city

Re: Output AFR data to gauge

Post by nolagg » Sun Feb 25, 2018 6:33 am

Following
Top
shnazzle
Posts:13
Joined:Sun Jan 28, 2018 6:06 pm

Re: Output AFR data to gauge

Post by shnazzle » Mon Feb 26, 2018 9:12 pm

nolagg wrote: ↑
Sun Feb 25, 2018 6:33 am
Following
+1
Top
nolagg
Posts:20
Joined:Sat Jan 16, 2016 5:12 pm
Location:New York city

Re: Output AFR data to gauge

Post by nolagg » Mon Mar 05, 2018 2:55 pm

Bump....
Top
cmj
Posts:28
Joined:Mon Dec 05, 2016 6:48 pm

Re: Output AFR data to gauge

Post by cmj » Mon Mar 05, 2018 4:01 pm

Not really. There are no analog outputs.
Top
shnazzle
Posts:13
Joined:Sun Jan 28, 2018 6:06 pm

Re: Output AFR data to gauge

Post by shnazzle » Tue Mar 06, 2018 4:37 pm

I'm guessing it's more a case of being the other way around.
A WBO gauge with an analogue out to the emu
Top
nolagg
Posts:20
Joined:Sat Jan 16, 2016 5:12 pm
Location:New York city

Re: Output AFR data to gauge

Post by nolagg » Tue Mar 06, 2018 4:52 pm

Yeah,even though I have my AEM powered and grounded at the sensor ground ....my aem and emu AF are off a little and always needs to be calibrated which in turn still can't get it perfect. Was thinking of switching to the ecumasters wideband . My tps has the same issue where the voltage will change before and after start up by like 0.2-0.3 volts .
Top
Locked

Return to “EMU STANDALONE”