DBW

All about our superior engine management unit.
Locked
RHD
Posts:537
Joined:Tue Oct 07, 2014 4:28 pm
DBW

Post by RHD » Wed Jun 03, 2015 10:03 am

So how do we connect this throttle??

it is from an Australian ford 6 cyl

Image

RHD
Posts:537
Joined:Tue Oct 07, 2014 4:28 pm

Re: DBW

Post by RHD » Mon Dec 14, 2015 4:02 pm

Just bumping this thread

i still need to find the settings for this DBW hrottle body. I have a customer trying to set this up right now and had a lot of interest for them in Aus they are a 4.0L turbo 6cyl ver popular and ideal candidate for EMU ecu

PSI-Motor
Posts:455
Joined:Fri Aug 15, 2014 10:57 pm

Re: DBW

Post by PSI-Motor » Mon Dec 14, 2015 7:55 pm

Is this the one?

Image

Image
EcuMaster Sweden

User avatar
Wuniek
Posts:115
Joined:Fri Aug 15, 2014 6:38 pm
Location:Warsaw

Re: DBW

Post by Wuniek » Mon Dec 14, 2015 8:00 pm

RHD wrote:Just bumping this thread

i still need to find the settings for this DBW hrottle body. I have a customer trying to set this up right now and had a lot of interest for them in Aus they are a 4.0L turbo 6cyl ver popular and ideal candidate for EMU ecu
Hi,

i looked a little bit for it and i assume it will bit easier if you will put more info in first post:
THROTTLE BODY FG FALCON 6CYL
PART # 8R29-9F991-AA

foto is always good thing to add but i will prefer to see something like this :
Image

then pin out or data sheet is needed to tell more...

and from there i cannot help you, all data i found is on Australian forums ( for registered users), i didn't find any replacement number for it

then typically that particular throttle body model should be send to Ecumaster for testing and setting up proper parameters for it, and this something i think hard to skip as you don`t want any strange
behavior on your throttle

and last one you need Ecumaster DBW module ( and it is not designed for road usage )
Image

RHD
Posts:537
Joined:Tue Oct 07, 2014 4:28 pm

Re: DBW

Post by RHD » Tue Dec 15, 2015 3:29 pm

Thank you PSI-Motor im sure that will be helpful

Yes sorry Wuniek, I know i should have added more info but its not my vehicle and i dont actually know a great deal about it all i have is the picture of the throttle body part number that another customer sent. The customer is using the DBW module and has it all hooked up and sort of working but its not very satisfactory, so he must have the correct pin connections already we just have to configure the settings somehow.

User avatar
Wuniek
Posts:115
Joined:Fri Aug 15, 2014 6:38 pm
Location:Warsaw

Re: DBW

Post by Wuniek » Tue Dec 15, 2015 6:33 pm

so if you are on stage where device is mounted and willing to work, i will send project and logs to Ecumaster team for verification
personally if i would be in your situation i will just buy this part and send it directly to Ecumaster and wait for update from them
never the less all info thats is really needed posted PSI now someone knowable need to interpret this data and propose setup for further testing

Locked