Page 1 of 1
Which is the best place to ground VR sensors shields?
Posted: Mon Jan 18, 2016 4:17 pm
by Omibi
Hi,
Which is the best place to gorund the shields of the VR sensors? B17?
Re: Which is the best place to ground VR sensors shields?
Posted: Mon Jan 18, 2016 11:54 pm
by ATS_Scott
Omibi wrote:Hi,
Which is the best place to gorund the shields of the VR sensors? B17?
B17 not B18
OOps got in a hurry and mis-typed.
Re: Which is the best place to ground VR sensors shields?
Posted: Tue Jan 19, 2016 4:53 pm
by shrek69
ATS_Scott wrote:Omibi wrote:Hi,
Which is the best place to gorund the shields of the VR sensors? B17?
B17 not B18
OOps got in a hurry and mis-typed.
Re: Which is the best place to ground VR sensors shields?
Posted: Tue Jan 19, 2016 5:47 pm
by BigMac
I like to ground everything direct to the battery -ve using as many separate wires as possible. Only CLT ,air temp to the sensor ground on the ECU
Re: Which is the best place to ground VR sensors shields?
Posted: Wed Jan 20, 2016 6:09 am
by RHD
SHIELDS not grounds!... can be earthed anywhere on the chassis but ONLY at one end of the shield
Re: Which is the best place to ground VR sensors shields?
Posted: Wed Jan 20, 2016 10:57 am
by BigMac
Yes shields as well straight to the battery neg. Only wires I put to chassis or engine block would be coil grounds