Page 1 of 1
EDL-1 issue, data doesn't show in graphs
Posted: Mon Jun 26, 2017 12:02 am
by JZX100EMU
Hi all,
I've just had a 1+ hour trip. taking my SD-card to check the data, but is simply doesn't show in the graphs... what's going on!?
It did work previously...
The file size is 1,939 kB so the data should be there...
File-->import log-->ECUMASTER logger
Software version 1.88exp1
EDL-1 firmware, original, not updated.
Anyone have this issue?
would appreciate support here.
Cheers,
Re: EDL-1 issue, data doesn't show in graphs
Posted: Mon Jun 26, 2017 2:16 pm
by JZX100EMU
Update: installed firmware version 1.05 and re-formatted the SD card.
Hope this helps.
FYI it's a 16 GB FAT32 formatted SD card
Re: EDL-1 issue, data doesn't show in graphs
Posted: Tue Jun 27, 2017 10:29 pm
by JZX100EMU
Well... the green LED was blinking, but upon putting the SD-card in my computer... no luck. no data!!!
I have no clue what's going on?
contact the local distributor/dealer?
any pointers from you guys?
Re: EDL-1 issue, data doesn't show in graphs
Posted: Wed Jun 28, 2017 3:24 pm
by roquete
Post one of the files from edl.
Re: EDL-1 issue, data doesn't show in graphs
Posted: Wed Jun 28, 2017 5:44 pm
by JZX100EMU
Files can be found in the dropbox folder, linked below.
https://www.dropbox.com/sh/us1wdzc13di6 ... Yht9a?dl=0
as an update: tried re-formatting, bought an other brand SD card with lower storage, and now the RED led keeps blinking.
Indicating an error with the SD card...
The files from the EDL-1 were taken without such an error. at that point the LED blinked GREEN, indicating saving
Re: EDL-1 issue, data doesn't show in graphs
Posted: Mon Jul 03, 2017 8:02 am
by JZX100EMU
Tried different size SD cards as well as different brands... no luck!
Could really do with some assistance by now...
Re: EDL-1 issue, data doesn't show in graphs
Posted: Tue Jul 04, 2017 1:01 pm
by roquete
that is the same problem as i had, but mine was solved with 1.05fw.
Data is corrupt on your files, so you can also have a ground problem, do you have comunication loss when logging to pc?
Re: EDL-1 issue, data doesn't show in graphs
Posted: Fri Jul 07, 2017 11:50 pm
by JZX100EMU
I have upgraded to 1.05
No data loss whilst logging to PC