Can Bus connecting

All about our superior engine management unit.
Locked
DT-GT42
Posts:24
Joined:Thu Sep 03, 2015 12:24 am
Can Bus connecting

Post by DT-GT42 » Sun Feb 28, 2016 2:50 pm

Hello
Anyone has a can Bus Wiring Diagramm ??

Greetz
Top
Karel
Posts:408
Joined:Wed Sep 10, 2014 11:58 am
Location:Czech Republic
Contact:
Contact Karel

Re: Can Bus connecting

Post by Karel » Sun Feb 28, 2016 5:44 pm

GND
CANH
CANL
Top
DT-GT42
Posts:24
Joined:Thu Sep 03, 2015 12:24 am

Re: Can Bus connecting

Post by DT-GT42 » Sun Feb 28, 2016 6:20 pm

Yes but which connector is what ?
In the Emu are 4 connectors
Top
roquete
Posts:108
Joined:Fri Apr 24, 2015 9:08 pm

Re: Can Bus connecting

Post by roquete » Sun Feb 28, 2016 8:59 pm

you will need the can-bus module, its connected to the serial port (round 5 pin), then on the can-bus module there is the 6 pin round plug and the pinout is at EXT. PORT / GENERAL help
Top
Locked

Return to “EMU STANDALONE”