Hello,
The car ran with the original ECU but stalled when you stop for a roundabout etc.
Now I have installed a EMU Classic and with some research have some basic settings and I believe that with this, the engine can start.
but that is not the case here, when I have "batch all injectors" disabled I have spark but no pops.
When I have "batch all injecors" enabled I have a few good pops, then some pops in the intake and then the engine is flooded.
This is the first time that I'm doing stuff with a standalone so I must have missed something.
Can someone take a look at my map?
https://drive.google.com/file/d/18_KNj3 ... sp=sharing
Thanks!