Trigger settings for Nissan ca18det s13?
Hi,
I am looking for the trigger settings on a Nissan ca18det s13. What trigger does it have, some speak about CAS and some about a 24+1?
Is there anyone that has used the factory harness with an adapter and got it to work?
Thanks,
Joakim
I am looking for the trigger settings on a Nissan ca18det s13. What trigger does it have, some speak about CAS and some about a 24+1?
Is there anyone that has used the factory harness with an adapter and got it to work?
Thanks,
Joakim
Re: Trigger settings for Nissan ca18det s13?
Im running adapter loom in my nissan Ca18det.
It is cas settings. Send me an e mail Joakim.
It is cas settings. Send me an e mail Joakim.
EcuMaster Sweden
Re: Trigger settings for Nissan ca18det s13?
I will also need one of these for a CA18 soon, does anyone have a base settings/tune to share?
thank you
thank you
- Kisielisodd
- ECUMASTER TEAM
- Posts:227
- Joined:Fri Aug 15, 2014 9:49 pm
Re: Trigger settings for Nissan ca18det s13?
proven working configuration

Re: Trigger settings for Nissan ca18det s13?
That is perfect, thank you
Re: Trigger settings for Nissan ca18det s13?
Can speed meter work with emu?
Re: Trigger settings for Nissan ca18det s13?
In your car the signal from gearbox (VR sensor) goes to dashboard and then to ECU.
So your speed should work normally with EMU, and you should provide speed signal from your dashboard to EMU
So your speed should work normally with EMU, and you should provide speed signal from your dashboard to EMU
-
- Posts:35
- Joined:Sun Aug 17, 2014 2:33 pm
Re: Trigger settings for Nissan ca18det s13?
Has anyone base ignition timing map for ca18det?
Stock or allready tuned.
Big thx
Stock or allready tuned.
Big thx
Re: Trigger settings for Nissan ca18det s13?
E85 or regular pumpgas?eugen_troll wrote:Has anyone base ignition timing map for ca18det?
Stock or allready tuned.
Big thx
EcuMaster Sweden
-
- Posts:35
- Joined:Sun Aug 17, 2014 2:33 pm
Re: Trigger settings for Nissan ca18det s13?
Regular pumpgas.PSI-Motor wrote:E85 or regular pumpgas?eugen_troll wrote:Has anyone base ignition timing map for ca18det?
Stock or allready tuned.
Big thx
Re: Trigger settings for Nissan ca18det s13?
Ok. Tnx. Is there any base map for this engine?
- Kisielisodd
- ECUMASTER TEAM
- Posts:227
- Joined:Fri Aug 15, 2014 9:49 pm
Re: Trigger settings for Nissan ca18det s13?
Try this one, it's from our coworker car early configuration
- Attachments
-
- CA18DET.emu
- (72.82KiB)Downloaded 123 times
Re: Trigger settings for Nissan ca18det s13?
what would be a suitable IAT for this setup? I assume built in map is ok...
- ktsirigotakis
- Posts:66
- Joined:Sat Aug 16, 2014 8:39 am
Re: Trigger settings for Nissan ca18det s13?
on the back of the intake there is a one way valve for the breather i have removed the one way valve and put iat sensor there, i did it because i have an oil catch can its nice and looks like factory location
Re: Trigger settings for Nissan ca18det s13?
witch one you've put there?
- Kisielisodd
- ECUMASTER TEAM
- Posts:227
- Joined:Fri Aug 15, 2014 9:49 pm
- ktsirigotakis
- Posts:66
- Joined:Sat Aug 16, 2014 8:39 am
Re: Trigger settings for Nissan ca18det s13?
ecu master iat
first start right now!!!!!!!!!!!!1 few problems trying to find solution.
s13 doesn't have fuel pump relay????? i cant find it
first start right now!!!!!!!!!!!!1 few problems trying to find solution.
s13 doesn't have fuel pump relay????? i cant find it
- ktsirigotakis
- Posts:66
- Joined:Sat Aug 16, 2014 8:39 am
Re: Trigger settings for Nissan ca18det s13?
i have some problems with my clt cant find the values to calibrate it dose some have them?
- ktsirigotakis
- Posts:66
- Joined:Sat Aug 16, 2014 8:39 am
Re: Trigger settings for Nissan ca18det s13?
Thanks psi but i have remove the old wiring due to terible contition. Any way i have fount the problem my friend had marked worng the wirePSI-Motor wrote:Pin 18 in Nissans harness is fuelpump
