Page 1 of 2
Trigger settings for Nissan ca18det s13?
Posted: Thu Dec 04, 2014 8:35 pm
by Grey
Hi,
I am looking for the trigger settings on a Nissan ca18det s13. What trigger does it have, some speak about CAS and some about a 24+1?
Is there anyone that has used the factory harness with an adapter and got it to work?
Thanks,
Joakim
Re: Trigger settings for Nissan ca18det s13?
Posted: Thu Dec 04, 2014 9:29 pm
by PSI-Motor
Im running adapter loom in my nissan Ca18det.
It is cas settings. Send me an e mail Joakim.
Re: Trigger settings for Nissan ca18det s13?
Posted: Wed Feb 11, 2015 1:53 pm
by RHD
I will also need one of these for a CA18 soon, does anyone have a base settings/tune to share?
thank you
Re: Trigger settings for Nissan ca18det s13?
Posted: Thu Feb 12, 2015 10:00 am
by Kisielisodd
proven working configuration
Re: Trigger settings for Nissan ca18det s13?
Posted: Mon Feb 16, 2015 4:07 pm
by RHD
That is perfect, thank you
Re: Trigger settings for Nissan ca18det s13?
Posted: Sun Mar 08, 2015 1:05 am
by yiipi
Can speed meter work with emu?
Re: Trigger settings for Nissan ca18det s13?
Posted: Mon Mar 09, 2015 1:37 pm
by Jadzwin
In your car the signal from gearbox (VR sensor) goes to dashboard and then to ECU.
So your speed should work normally with EMU, and you should provide speed signal from your dashboard to EMU
Re: Trigger settings for Nissan ca18det s13?
Posted: Thu Mar 12, 2015 7:31 pm
by eugen_troll
Has anyone base ignition timing map for ca18det?
Stock or allready tuned.
Big thx
Re: Trigger settings for Nissan ca18det s13?
Posted: Thu Mar 12, 2015 8:53 pm
by PSI-Motor
eugen_troll wrote:Has anyone base ignition timing map for ca18det?
Stock or allready tuned.
Big thx
E85 or regular pumpgas?
Re: Trigger settings for Nissan ca18det s13?
Posted: Thu Mar 12, 2015 9:17 pm
by eugen_troll
PSI-Motor wrote:eugen_troll wrote:Has anyone base ignition timing map for ca18det?
Stock or allready tuned.
Big thx
E85 or regular pumpgas?
Regular pumpgas.
Re: Trigger settings for Nissan ca18det s13?
Posted: Tue Mar 17, 2015 10:13 am
by yiipi
Ok. Tnx. Is there any base map for this engine?
Re: Trigger settings for Nissan ca18det s13?
Posted: Tue Mar 17, 2015 10:30 am
by Kisielisodd
Try this one, it's from our coworker car early configuration
Re: Trigger settings for Nissan ca18det s13?
Posted: Wed Mar 18, 2015 10:38 am
by yiipi
what would be a suitable IAT for this setup? I assume built in map is ok...
Re: Trigger settings for Nissan ca18det s13?
Posted: Wed Mar 18, 2015 3:19 pm
by ktsirigotakis
on the back of the intake there is a one way valve for the breather i have removed the one way valve and put iat sensor there, i did it because i have an oil catch can its nice and looks like factory location
Re: Trigger settings for Nissan ca18det s13?
Posted: Wed Mar 18, 2015 10:31 pm
by yiipi
witch one you've put there?
Re: Trigger settings for Nissan ca18det s13?
Posted: Thu Mar 19, 2015 12:28 am
by Kisielisodd
Re: Trigger settings for Nissan ca18det s13?
Posted: Fri Mar 20, 2015 5:34 pm
by ktsirigotakis
ecu master iat
first start right now!!!!!!!!!!!!1 few problems trying to find solution.
s13 doesn't have fuel pump relay????? i cant find it
Re: Trigger settings for Nissan ca18det s13?
Posted: Sat Mar 21, 2015 3:12 pm
by ktsirigotakis
i have some problems with my clt cant find the values to calibrate it dose some have them?
Re: Trigger settings for Nissan ca18det s13?
Posted: Sat Mar 21, 2015 6:34 pm
by PSI-Motor
Pin 18 in Nissans harness is fuelpump
Re: Trigger settings for Nissan ca18det s13?
Posted: Tue Mar 24, 2015 6:33 pm
by ktsirigotakis
PSI-Motor wrote:Pin 18 in Nissans harness is fuelpump
Thanks psi but i have remove the old wiring due to terible contition. Any way i have fount the problem my friend had marked worng the wire
