Page 1 of 1
ABS to ECU by canbus
Posted: Fri Apr 24, 2015 1:36 pm
by Horsty
hi there,
can i wire an ITT Mark20 Plus ABS (+ is the one with canbus) directly to the ecu?
i wanted to do so because then i could use the ABS as VSS.
cheers,
Jan
Re: ABS to ECU by canbus
Posted: Fri Apr 24, 2015 1:59 pm
by Jadzwin
Hi Horsty!
For example in Mini Cooper we read wheel speed from ABS ECU via CAN Bus.
So it is possible but we need to know what CAN ID transmit wheel speed and what is the data format.
Re: ABS to ECU by canbus
Posted: Sat Apr 25, 2015 2:37 pm
by Horsty
thank you!
i have to check that somehow...
Re: ABS to ECU by canbus
Posted: Sat Apr 25, 2015 3:40 pm
by Wuniek
you will need connect to car CAN and somehow listen to it ... :
https://youtu.be/hpwBmTw7Gm0
http://goodfet.sourceforge.net/hardware/goodthopter12/
Horsty wrote:thank you!
i have to check that somehow...
Re: ABS to ECU by canbus
Posted: Sat Apr 25, 2015 10:22 pm
by Jadzwin
You can buy Microchip CAN BUS analyzer. It is quite chip and very helpfull
Re: ABS to ECU by canbus
Posted: Sat May 02, 2015 12:02 am
by Horsty
ok thank you.
i have to do this somewhere in the future.
but i'll let you know!
Re: ABS to ECU by canbus
Posted: Sun Mar 13, 2016 10:34 am
by b45
Jadzwin wrote:You can buy Microchip CAN BUS analyzer. It is quite chip and very helpfull
I bought canBus analyzer from microchip. Try to hook it up into canBus cable beneath steering above foot rest. But no luck. Any step by step guide doing this into bmw E46?