Page 1 of 1
VSS Audi
Posted: Thu Jun 04, 2015 8:34 am
by Doofy
Hi!
I can not adjust the speed sensor audi 012409191D
How to configure the sensors setup?
Thank you
Re: VSS Audi
Posted: Thu Jun 04, 2015 1:47 pm
by Jadzwin
Hi!
Do you have already frequency readings in EMU ?
Re: VSS Audi
Posted: Fri Jun 05, 2015 9:15 am
by Doofy
Jadzwin wrote:Hi!
Do you have already frequency readings in EMU ?
not
Re: VSS Audi
Posted: Sun Jun 21, 2015 11:16 am
by Doofy
I can not adjust the speed sensor.
Gearbox 01e audi
Help
Re: VSS Audi
Posted: Sun Jun 21, 2015 4:46 pm
by Karel
Its very, very, very simple !
It works like a swith 8times per revolution.
use VSS setting:
Gear detection type : Calculated
Speedsource : Sensor
Sensor type : Hall/ Optical
Trigger: Falling
Freq. Divider : Divide by 8
Enable pullup: yes
one pin of the sensor goes on sensor ground from EMU, and second goes into the VSS pin of EMU.
After this you need to look into the log and put in the gear ratios.
Re: VSS Audi
Posted: Mon Jun 22, 2015 10:52 am
by Doofy
Thanks! Thanks! Thanks!