Page 1 of 1

Keelog serial connection

Posted: Fri Jul 10, 2015 11:19 pm
by chris72
Hi
i now have Keelog 2GB time keeper, can you provide a connection diagram so i can make a lead, also i use bluetooth dongle for my dashboard i assume i can use both with the signals to the bluuetooth passing through the keelog device

thanks

Re: Keelog serial connection

Posted: Fri Jul 10, 2015 11:46 pm
by Jadzwin
Please find attached EMU to Keelog manual here:

https://dl.dropboxusercontent.com/u/286 ... keeper.pdf

Re: Keelog serial connection

Posted: Sat Jul 11, 2015 9:38 pm
by chris72
Many thanks
Excellent support as usual

Re: Keelog serial connection

Posted: Fri Jul 17, 2015 9:32 pm
by chris72
Hi
is it possible to run Keelog device together with Blutooth module ?

thanks

Re: Keelog serial connection

Posted: Tue Jul 21, 2015 4:21 pm
by Jadzwin
Yes. You just need to connect Keelog RX to EMU extension port TX.
It use the same baud rate as BT module.

Re: Keelog serial connection

Posted: Wed Jan 20, 2016 6:46 pm
by Jan32
Hey i have now an keelog serial ghost logger but i cant import the logfiles in EMU client. Attached you find one logfile and configfile.
The Ascii code in the Logfile looks ok for me.

The import over Android log works with these log file, but the other import over keelog import function doesen´t work, maybe there is a problem in client?

Re: Keelog serial connection

Posted: Thu Jan 21, 2016 11:42 am
by DT-GT42
Where i can buy these parts?

Greetz

Re: Keelog serial connection

Posted: Thu Jan 21, 2016 3:14 pm
by Jadzwin
Yor log looks a little strange. There is no time stamp inside. Are you sure you have Timekeeper device ?

In our logs there is a timestamp in the file that looks like this:

[2015/6/7 4:15:00] [1] asdadad

EMU client is looking for timestamps to find different "logs"



Jan32 wrote:Hey i have now an keelog serial ghost logger but i cant import the logfiles in EMU client. Attached you find one logfile and configfile.
The Ascii code in the Logfile looks ok for me.

The import over Android log works with these log file, but the other import over keelog import function doesen´t work, maybe there is a problem in client?

Re: Keelog serial connection

Posted: Thu Jan 21, 2016 3:17 pm
by Jan32
Hey Kuba,

The option Timestamp is active.

Re: Keelog serial connection

Posted: Thu Jan 21, 2016 4:38 pm
by Jadzwin
We use the same...

Is power from your keelog dissapear when you turn ignition off ?
The timestamp seems to be written when the device is power on

Re: Keelog serial connection

Posted: Sat Jan 23, 2016 11:11 pm
by chris72
DT-GT42 wrote:Where i can buy these parts?

Greetz
Hi
I purchased mine direct from Keelog site and made my own lead but i think they are available from ECUmaster with lead

Re: Keelog serial connection

Posted: Tue Apr 12, 2016 2:54 pm
by 2wheels1man
Hi. I'm having the same problem as Jan32. Was this resolved?
I've edited the config file as instructed in your SerialGhost user's manual. Timestamping is on, but there are no timestamps in log.txt.
I can import it with the Android import option.
EDIT: I've tried using the official setup utility, but no change.

Re: Keelog serial connection

Posted: Thu Apr 14, 2016 7:33 pm
by 2wheels1man
I've also noticed, that when I import the log with the android option, LAMBDA value is always 0.00.
AFR has correct values though...
Maybe a bug in the software. ver 1.162

Re: Keelog serial connection

Posted: Thu Apr 14, 2016 8:16 pm
by Jadzwin
For time stamping the problem is with the new version of keelog :( You need to write to keelog manufactrer.
According Lambda I will check it.

Re: Keelog serial connection

Posted: Sun Jun 12, 2016 11:50 pm
by shrek69
Jadzwin wrote:For time stamping the problem is with the new version of keelog :( You need to write to keelog manufactrer.
According Lambda I will check it.
Any other Options to log data without pc connected. :?:

Re: Keelog serial connection

Posted: Mon Jul 25, 2016 10:35 am
by Jan32
Jadzwin wrote:For time stamping the problem is with the new version of keelog :( You need to write to keelog manufactrer.
According Lambda I will check it.
Hey Jakob,

i fixed the problem with keelog but Lambda value isnt there.

Re: Keelog serial connection

Posted: Mon Jul 25, 2016 12:47 pm
by 2wheels1man
Jan32 wrote:
Jadzwin wrote:For time stamping the problem is with the new version of keelog :( You need to write to keelog manufactrer.
According Lambda I will check it.
Hey Jakob,

i fixed the problem with keelog but Lambda value isnt there.
+1

Re: Keelog serial connection

Posted: Mon Nov 28, 2016 11:40 pm
by Jan32
Did you take care of this issue and also is the VE value nor available in the Ghost logger.

I think it is an Problem of the import function because the BT module uses the same protocol and there workes lambda an VE etc.

Please can you have a look about this issue?