Page 1 of 1
Bosch 0227100211
Posted: Sun Jul 19, 2015 10:46 pm
by MichaZ
Hello,
i want to install 2 of 0227100211 Bosch igniter for wasted spark.
Do it work on Emu without problems ?
Thanks Michael
Re: Bosch 0227100211
Posted: Mon Jul 20, 2015 8:56 am
by gregpe
why do you want to install igniter? EMU has inbuilt coils drivers.
Re: Bosch 0227100211
Posted: Mon Jul 20, 2015 10:00 am
by MichaZ
Emu don`t work with this coils.
0221505437
with igniter for one coil (0227100124) it work.
i want 8 of this coils , with 4 coil output and 2 of Bosch 211 igniter
i can do it i think.
My problem is the 124 igniter work with coil output from emu. Thats negative output , right?
i think the 211 igniter needs positive output.
Is this right ?
Re: Bosch 0227100211
Posted: Mon Jul 20, 2015 1:48 pm
by Wuniek
maybe is worth to try 060780002010 this are FIAT passive coil works with EMU perfect and they are quite compact size, provide good spark energy and they are cheep also (with 3ms dwell time at 12V gives you around 9A on output)
Re: Bosch 0227100211
Posted: Mon Jul 20, 2015 2:00 pm
by MichaZ
thanks for great news
they work without any igniter only on Emu?
On Emu i must change to "coils without amplifier" , right?
Re: Bosch 0227100211
Posted: Mon Jul 20, 2015 2:03 pm
by Wuniek
MichaZ wrote:thanks for great news
they work without any igniter only on Emu?
On Emu i must change to "coils without amplifier" , right?
yes exactly and check it double because setting it as active coil will result of quick charge and over dwell if you don`t change it quick is big chance to damage ECU ( but service at Ecumaster is very quick:) )
Re: Bosch 0227100211
Posted: Mon Jul 20, 2015 7:48 pm
by snafu
yes it works. I use it wyth Suzuki GSXR 600 ignition coils
Re: Bosch 0227100211
Posted: Tue Jul 21, 2015 9:01 am
by MichaZ
Thank you all !
I think my Emu is damaged, i ve tested at beginning all setting.
Now no Coil work directly on Emu.
Re: Bosch 0227100211
Posted: Tue Jul 21, 2015 11:44 am
by Wuniek
MichaZ wrote:Thank you all !
I think my Emu is damaged, i ve tested at beginning all setting.
Now no Coil work directly on Emu.
unfortunately, the EMU damage is possible in bad configuration of coils output
Code: Select all
Ignition outputs
Ignition output
table is responsible for assigning ignition events to ignition outputs.
ATTENTION !
Selecting active coils in the software when using passive coils will lead to
damage to the coils or EMU device!
did you tried all 6 outputs ? maybe you have 2 extra ones still to test
Re: Bosch 0227100211
Posted: Tue Jul 21, 2015 1:08 pm
by MichaZ
I test with the 2 outputs i not need.
Write again later