Page 1 of 1
2 JZ and Dwell Errors
Posted: Tue Mar 15, 2016 2:47 pm
by redmkiv
working on Supra, and have some Dwell Errors, Engine don t revs over 6500 RPM, all other is working fine, is the first Supra with wiring the EMU without the Adapter
Re: 2 JZ and Dwell Errors
Posted: Tue Mar 15, 2016 3:44 pm
by redmkiv
First settngs for Fuelcut are 7300RPM i changed it to 6500 for testing last driving. Drive with load i never revs more around 4500 to 4800 RPM. No Launchcontroll or Soft revcut aktive.
Re: 2 JZ and Dwell Errors
Posted: Tue Mar 15, 2016 6:14 pm
by redmkiv
Engine Dead yesterday....Piston 6 to lean.
Re: 2 JZ and Dwell Errors
Posted: Thu Mar 17, 2016 9:19 am
by Kenny123
Have a similar problem !
What have you done ?!? In the signal wire from the camshaft position sensor a resistor ?!?
Or in the signal wire from the crank position sensor ?!?
Thanks for your help !
Re: 2 JZ and Dwell Errors
Posted: Thu Mar 17, 2016 5:32 pm
by redmkiv
Resistor was the wrong way...don 't do it.