Ecumaster forum

keep getting this error, I am based in UK and have tries a few laptops with the same error? any ideas

"this device is not able to work with us windows version"

I have connected to Other EMU with out any issues

Is this PL version ?

No its a EN version, but was brought from poland

Try a newer version of the firmware.

how is he going to do that if he cant connect a laptop

when sam mapped mine he couldnt connect with his laptop , luckily i had mine with me . ive never had any issues

Ive tried 5 laptops now, getting annoyed af

if you can try installing a polish version of windows , a bit of a ball ache i know but its worth a shot

ok have to ask have you downloaded any usb drivers ?

http://ecumasterusa.com/tech-info/

It installed the drivera automatically, but will give it a go thanks, installing another copy of windows is out the picture

Problem solved, had to download the latest driver from poland website

other web pages are not updated

http://ecumaster.com/testVersions.html

good to go then , now the fun begins

I also have the same problem, but downloading the experimental software didn't solve the problem. Neither did the driver from US site. Funny thing is that I did not have problem previously connecting to another ECU...

Any idea for solution?

Thanks

Best regards

Rok

TheMr2v6 wrote:I also have the same problem, but downloading the experimental software didn't solve the problem. Neither did the driver from US site. Funny thing is that I did not have problem previously connecting to another ECU...

Any idea for solution?

Thanks

Best regards

Rok

Where are you located? If you're in the U.S. and you're having that problem, that means somebody brought you a gray market ECU and it will not work. Tell them to return it and purchase one through proper channels.

which version of windows are you trying to use? I had a similar problem on windows 7 but then used a work computer with windows 8 and it seems to work alot better, also alot more dials will run together on windows 8 where as windows 7 if i ran more then 2 they would freeze.

Well I am not from US. The ECU was bought from Ecumaster directly and yes I use Win7 but why could I connect to another ECU previously? But a friends PC with win 8 is fine. I don't like win 8 at all so if possible I would skip this option.

TheMr2v6 wrote:Well I am not from US. The ECU was bought from Ecumaster directly and yes I use Win7 but why could I connect to another ECU previously? But a friends PC with win 8 is fine. I don't like win 8 at all so if possible I would skip this option.

maybe try this USB driver : http://www.ftdichip.com/Drivers/D2XX.htm

drivers on EcuMaster site are 2.08.24 (No Longer Supported) and latest one are 2.12.16 when you look on this site you will find out that older one was not designed to work with W7 and W8 probably has newer one in standard installation

Nope still the same problem, even with the new driver.

Please contact us at tech(at)ecumaster.com