Having trouble setting proper Injector Cal
Posted: Tue Sep 22, 2015 10:57 pm
Hi, I'm having trouble setting the correct injector latency for my injectors, as the EMU only allows max table value of 18v. Is it ok if I only provide information up to 17.4v even though they provided me latency settings up to 20.9v?
This is the injector latency information I got from the manufacturer 1.63ms @ 8.7v 1.00ms @ 10.4v
.80ms @ 12.2v .70ms @ 13.9v .60ms @ 15.6v .56ms @ 17.4v .56ms @
19.1v .53ms @ 20.9v.
Thanks!
This is the injector latency information I got from the manufacturer 1.63ms @ 8.7v 1.00ms @ 10.4v
.80ms @ 12.2v .70ms @ 13.9v .60ms @ 15.6v .56ms @ 17.4v .56ms @
19.1v .53ms @ 20.9v.
Thanks!