Ecumaster forum

I want to ask if there is a way to change values in ve map by percent it very usefull faction its in the way to a new firmware update thanks in advance

yes this function has been available in the test versions for quite some time now

you can enter the value followed by + - * or / and it will add subtract multiply or divide each cell by the entry value.

for example if you want to halve all the values in the table, highlight the whole table and type 0.5* (or you could divide by two by typing 2/)

I want to mark one or more values in the table And plus or minus 5% 10% 20% from the value is that possible or we have to what for a new firmware

for +5% you go to selected cell or area and type 1,05* enter.
for -5% type 0,95* and so on.