wiring up singlevanros and coils bmw
Posted: Mon Jun 27, 2016 11:37 pm
got the most things working now, but the coils. according to the manual the passive coils should have constant +12v, and connect the ground to the wires from the EMU; but bmw coils have 3 wires coming from them. Am i supposed to connect them to +12v, ground, and the emu (ignition)wire to the third wire on the coil?
also, for vans, i run a single vanos engine, what out/inputs should i use for the camshaft trigger and controlling of the solenoid. and what configurations.-
the engine is a 93 mod, m50tub25
also, for vans, i run a single vanos engine, what out/inputs should i use for the camshaft trigger and controlling of the solenoid. and what configurations.-
the engine is a 93 mod, m50tub25