Page 1 of 1
Re: Using a Greddy Solenoid for Boost Control
Posted: Sun Aug 07, 2016 11:10 pm
by ren
If it's the one from the profec-b or profec-b spec 2, then as per the manual.
Re: Using a Greddy Solenoid for Boost Control
Posted: Mon Aug 08, 2016 2:33 pm
by Welshman
i use the greddy spec 2 valve , wired as per manual , atm im running 2.3 bar , dropping to 2.1 by 8k in closed loop
Re: Using a Greddy Solenoid for Boost Control
Posted: Wed Aug 10, 2016 10:31 pm
by ren
Stout. What engine/turbo is that on?
Re: Using a Greddy Solenoid for Boost Control
Posted: Thu Aug 11, 2016 5:50 pm
by Welshman
3sgte pte 6266 gen 2
just dropped a piston though , would of been ok if heat compensations were set right HOT day , drag strip and big cue not so good 10.55 though .