Page 1 of 1
help tachometer golf 2
Posted: Tue Nov 17, 2015 8:10 pm
by vortex
Is there anyone who has installed Emumaster on a golf 2 and got tachometer and work? original so tachometer connected to the ignition coil. I have attached the cable to Aux 4 which then goes to pin 10 on the (T28) connector behind the dashboard
Re: help tachometer golf 2
Posted: Tue Nov 17, 2015 10:47 pm
by Phil
There is an issue with getting these working with a Megasquirt, I assume the EMU will be the same
http://www.clubgti.com/showthread.php?2 ... ounter-fix
Re: help tachometer golf 2
Posted: Wed Nov 18, 2015 11:06 am
by Kisielisodd
viewtopic.php?f=19&t=852
i don't know the issue with speedometer, but maybe similar solution to this, will solve problem
Re: help tachometer golf 2
Posted: Thu Nov 19, 2015 12:28 pm
by Jan32
I installed it in an MK2 with this module
http://www.zmm-electronic.de/ignition-s ... anguage=en
It worked very well.
Re: help tachometer golf 2
Posted: Thu Nov 19, 2015 9:39 pm
by vortex
Do you drive Wested spark or singel coil ? or use the module with Emu master ?
I forgot to write that I have a VR6 engine in a Golf 2
Re: help tachometer golf 2
Posted: Mon Nov 23, 2015 11:23 pm
by Jadzwin
Try to pullup AUX4 output with the coil from relay
It will induce high voltage. In most cases tacho driven by ignition coil works correctly
Re: help tachometer golf 2
Posted: Thu Nov 26, 2015 9:35 pm
by TooM-As
need for additional protection aux output of high voltage from the coil as you advise ?
Re: help tachometer golf 2
Posted: Thu Nov 26, 2015 10:11 pm
by vortex
I test with the relay tomorrow
Re: help tachometer golf 2
Posted: Sun Nov 29, 2015 7:02 pm
by vortex
It works now ☺ . One Bosch bip373 conected on AUX4 then a relay coil to . Thanks for the help
Re: help tachometer golf 2
Posted: Mon Nov 30, 2015 6:51 pm
by Jadzwin
Did you try without BIP ? It also should work
Re: help tachometer golf 2
Posted: Tue Dec 01, 2015 7:59 pm
by vortex
I have tried without bip and another auxiliary . Did not work