Ecumaster forum

Hello, im a bit confused with setting fuel pressure .
My injectors are 373cc @ 3bar,
In EMU i cant find where to set it at 3bar (change it to 3.8bar later as fitting different fpr)

Thanks

Laurysr wrote:Hello, im a bit confused with setting fuel pressure .
My injectors are 373cc @ 3bar,
In EMU i cant find where to set it at 3bar (change it to 3.8bar later as fitting different fpr)

Thanks

Fuel -----> General ------> injector size = 373cc.
When changing fuelpressure to 3.8 just take 373cc × 1.092 = 407cc and type that in as injector size.
May vary a little bit due to ssome small changes in injector deadtime.

Thank you