Page 1 of 1
1jz ecu setup
Posted: Mon Dec 14, 2015 11:06 am
by Santi253
having trouble with my emu and getting setup
says inactive
injector and coil phase
153624 in that order for both
iacv not hooked up
550cc denso injectors
can someone help me setup a base map for this thing
Re: 1jz ecu setup
Posted: Mon Dec 14, 2015 3:21 pm
by RHD
you will need to adapt it to suit your wiring but these settings do work
Re: 1jz ecu setup
Posted: Tue Dec 15, 2015 3:22 am
by Scooter
This is the ignition outputs and injector outputs I'm using, set at 10deg BTDC too. Your setup will depend on what coil setup you are running too, so check the coil wizard. here is a map with oem VVTI coils, set as wasted spark
Re: 1jz ecu setup
Posted: Wed Dec 16, 2015 1:14 am
by tommyboyblitz
RHD wrote:you will need to adapt it to suit your wiring but these settings do work
Im using this map and seems to be working well. The other one was very rich.
Im running 1jz gte vvti no vvti yet or a proper tune, but is working well and very smooth.
Re: 1jz ecu setup
Posted: Wed Dec 16, 2015 4:01 am
by Santi253
got my jz to run and idle
seems like the ignition and coil pack order was wrong,
i had it set 153624 life the firing order and some timing settings were wrong
thanks for the help