Page 1 of 1
how to datalog
Posted: Fri Dec 25, 2015 1:03 am
by ihiryu
Here's a pretty noob question.
How do we datalog? I've been doing a lot of live tuning, but there is a part in my Accel Enrichment that randomly happens and I cannot catch it. I have no idea how to use the software to datalog
Also does it output to a CSV file?
Re: how to datalog
Posted: Fri Dec 25, 2015 1:18 am
by roquete
Go to Log and choose one of the Graph (1, 2 or 3) to display the data, choose the fields you want in logged parameters button.
When you are connected its already logging all channels.
Re: how to datalog
Posted: Fri Dec 25, 2015 5:55 pm
by ihiryu
It's really logging all channels??
Where are these logs stored?
Re: how to datalog
Posted: Fri Dec 25, 2015 6:06 pm
by roquete
What client version are you using?
Re: how to datalog
Posted: Sat Dec 26, 2015 5:52 pm
by Welshman
logs are not saved automatically by default , you can set it to do that though in "Tools , Config "
Re: how to datalog
Posted: Mon Dec 28, 2015 7:39 pm
by ihiryu
1.51 which is a test version
Re: how to datalog
Posted: Tue Dec 29, 2015 10:44 pm
by ATS_Scott
MAN! you are missing out if your not using the logging features. So much easier to tune. Have you found the Tune Window under Log yet? That is also very useful. Once you get the graph window up, notice when you have your cursor over the log, it shows you the data from the log in blue in the tune window, and when off the log graph, it is live data in green. Get the latest test version, and use Auto tune, assuming you have target AFR/Lambda table set-up.
Re: how to datalog
Posted: Thu Dec 31, 2015 7:46 pm
by ihiryu
Nice! Didn't even see the new test version! Gonna download it now