Page 1 of 1
subaru EJ20 BASE MAP
Posted: Mon Aug 29, 2016 11:38 am
by janko
Hello,
Can someone share base map for Subaru EJ20 GC8 MY98 ? Or at least idle control and cold start-up maps? It takes more then 10 minutes to start when cold....
You can send me PM if You don't want Your map to be Public!
Best regards, Janko
Re: subaru EJ20 BASE MAP
Posted: Mon Aug 29, 2016 10:39 pm
by ren
Post the calibration you are using at the moment - I reckon your temperature compensations will be off, and after 10 minutes, with the heat you have managed to make, you are getting closer to the required fuel/air/ign setting.
Re: subaru EJ20 BASE MAP
Posted: Tue Aug 30, 2016 8:41 pm
by philsinc
hi, i have a basemap from my ej20 my97 with 440cc injectors. coldstart could be better but it works for starting the engine.
Re: subaru EJ20 BASE MAP
Posted: Thu Sep 01, 2016 5:25 pm
by janko
philsinc wrote:hi, i have a basemap from my ej20 my97 with 440cc injectors. coldstart could be better but it works for starting the engine.
Hi, i sent You PM!
Thanks
Re: subaru EJ20 BASE MAP
Posted: Sat Oct 08, 2016 9:38 pm
by Dimi6274
I have problems with crank sensor calibration.
The car doesnt startup the most of our tries.
We have connect the ingition and injectors in full sequential way.
Do you have a startup calibration to help us?
Thank you in advance
Re: subaru EJ20 BASE MAP
Posted: Wed Mar 01, 2017 8:28 am
by chicoman
philsinc wrote:hi, i have a basemap from my ej20 my97 with 440cc injectors. coldstart could be better but it works for starting the engine.
Hi!
Would You be so kind and share the map on PW.
Just finished wiring loom on cg8 my99, time to get started.