Mazda MX-5 NB - DET3 FIT with BOOST
No, there is not enought inputs.
Read my previous posts.
Read my previous posts.
1998 MX-5 NB 103kw, had DIY Turbo kit, Rotrex in progress.
- SpoolWithMe
- Posts:6
- Joined:Sun Nov 13, 2016 10:38 am
Re: Mazda MX-5 NB - DET3 FIT with BOOST
Does the MX-5 have a legit map sensor?
Re: Mazda MX-5 NB - DET3 FIT with BOOST
No, only MAF. MAP is on DET3 device. Please read whole topic.
1998 MX-5 NB 103kw, had DIY Turbo kit, Rotrex in progress.
- SpoolWithMe
- Posts:6
- Joined:Sun Nov 13, 2016 10:38 am
Re: Mazda MX-5 NB - DET3 FIT with BOOST
Hi, after going over the thread, I've modified the diagram. Could you please let me know if I have it correct? Thanks!
Original

Modified

Original

Modified

Re: Mazda MX-5 NB - DET3 FIT with BOOST
Yes that's it exactly how I have it.
1998 MX-5 NB 103kw, had DIY Turbo kit, Rotrex in progress.
- SpoolWithMe
- Posts:6
- Joined:Sun Nov 13, 2016 10:38 am
- SpoolWithMe
- Posts:6
- Joined:Sun Nov 13, 2016 10:38 am
Re: Mazda MX-5 NB - DET3 FIT with BOOST
Does this configuration allow for the use of the launch control feature?
Re: Mazda MX-5 NB - DET3 FIT with BOOST
I haven't tried, I like my car too much. But you have full control over timing retard and fuel so it will work. The issue is, that there is not an input to trigger it. But you can sacrifice Wideband input for racing, if have tuned well.
1998 MX-5 NB 103kw, had DIY Turbo kit, Rotrex in progress.
- SpoolWithMe
- Posts:6
- Joined:Sun Nov 13, 2016 10:38 am
Re: Mazda MX-5 NB - DET3 FIT with BOOST
Have your fuel trims been off?
Re: Mazda MX-5 NB - DET3 FIT with BOOST
You WBO /EGO corrections ? Yes, I have it on all the time, that's the only reason I have reasonable mileage I guess.
1998 MX-5 NB 103kw, had DIY Turbo kit, Rotrex in progress.